Go Back   The Ford Barn > To The Editors > Questions & Suggestions

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-31-2018, 10:10 AM   #1
browers
Junior Member
 
browers's Avatar
 
Join Date: Oct 2018
Location: Mariposa, CA
Posts: 3
Red face Tilly Carb Idle Air Adjustment Screw

My Tilly carb runs best when the idle air mixture screw is 1/8 to 1/4 open. What issues do I have preventing me from opening it to 1 1/2 open? I disconnected and plugged my vacuum wipers, which were leaking; also retorqued my manifold bolts to 45 f/lb's. New to Model A's.
browers is offline   Reply With Quote
Old 10-31-2018, 12:14 PM   #2
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Tilly Carb Idle Air Adjustment Screw

You posted in a seldom read forum intended for questions "To The Editors". You should post here: https://www.fordbarn.com/forum/forumdisplay.php?f=3 Welcome to the barn.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-31-2018, 05:41 PM   #3
browers
Junior Member
 
browers's Avatar
 
Join Date: Oct 2018
Location: Mariposa, CA
Posts: 3
Default Re: Tilly Carb Idle Air Adjustment Screw

Sponsored Links (Register now to hide all advertisements)
Thanks for sorting me out.

Billy
browers is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:02 PM.