The Ford Barn

Tinker · 10-20-2015, 07:34 PM

Vic on Sunday is the billet proof drags in Lakeland. Hope to see you. It Maybe the last year. Come out and see what the zephyr runs on an 1/8 mile for 10 bucks! Run what ya bring or just have the ccf guys show. It'll be fun ��

Vic Piano · 10-21-2015, 08:38 AM

Thanks Tinker, I know about the Billet Proof Drags in Lakeland, been there and done that, albeit not with the Zephyr... LOL. I've got a wedding this weekend that is taking up Saturday & Sunday

, or I'd be in Dawsonville, GA at the Moonshine Festival... I'll be posting info on the 2016 Florida "Barner's Bash" as soon as we have a weekend selected. Hopefully you will be able to make it to the "Bash". Have fun at the Drags.

Vic Piano · 10-21-2015, 11:10 AM

The Cigar City Flatheads T-Shirts are here, and they look super!

Be sure to order yours today.

All the T-Shirts (in the first order) are Extra Large. Cost for a shirt is $14.95 + $3.50 S&H (the shipping charge is good for up to three shirts).

If you can't wait to be the first kid on your block to be sportin' a CCF T-Shirt,

send a check or MO payable to Vic Piano, to: Vic Piano c/o Mizlou Television Network Inc. 7853 Gunn Hwy., Suite 343 Tampa, FL 33626.

As always, we thank you for supporting the Cigar City Flatheads.

Tinker · 10-21-2015, 09:34 PM

Quote:

Originally Posted by Vic Piano

Thanks Tinker, I know about the Billet Proof Drags in Lakeland, been there and done that, albeit not with the Zephyr... LOL. I've got a wedding this weekend that is taking up Saturday & Sunday

, or I'd be in Dawsonville, GA at the Moonshine Festival... I'll be posting info on the 2016 Florida "Barner's Bash" as soon as we have a weekend selected. Hopefully you will be able to make it to the "Bash". Have fun at the Drags.

Thanks Vic

all are weLcome no invitation needed. I'll talk to the other guys and see if they can go to the barn bash (if that's okay) ... I plan too and hope to have the 38 ready for its rundown.

Have a good time at the wedding, certainly more important then cars by any means.

Vic Piano · 10-22-2015, 06:17 AM

Tinker, Yes, it's ok, everyone is invited to the "Barner's Bash" and you don't need to drive a Flathead to the event. As we get things firmed up I'll continue to post information both here and on the Cigar City Flatheads FaceBook page. Hope you can make it.

As for the wedding... We'll see LOL

Vic Piano · 10-22-2015, 02:30 PM

Sponsored Links (Register now to hide all advertisements)

Vic Piano · 10-23-2015, 02:13 PM

Sorry to have to do this but...

Here are the new Postage Rates for the Cigar City Flatheads T-Shirts. One shirt, $6.30, Two Shirts, $8.00. This is in addition to the cost of $14.95 per shirt.

Vic Piano · 10-26-2015, 01:44 PM

Vic Piano · 10-29-2015, 08:10 AM

The good thing (I guess) is, the price of gas has come down recently.

The bad thing is, the price of oil has gone up...

I got very ambitious the other day and decided to change the oil & filters on several of our Flatheads... I went to the auto parts store and bought ten quarts of oil (they had a special where you could get an oil filter for free with the purchase of five quarts of a particular name brand of oil). I also bought some MMO, Engine Restorer (I use it in the LZ V-12), Brake Cleaner, and Gear Oil, all on sale.

When I got to the check out, the bill came to over $100.00!!!

Oh well, I guess what they say is true; if you want to play, you've got to pay...

Vic Piano · 10-30-2015, 07:51 AM

Thanks to everyone that took advantage of our 'low postage' offer for Cigar City Flatheads T-Shirts, we appreciate your support of the Cigar City Flatheads.

BILL WZOREK · 10-30-2015, 02:31 PM

Vic,
Any idea on the Bash dates? Lots of interest at the Wzorek homestead. Need to give my in-laws some idea of when we're coming so they can rent some ramps for there house to get me inside.

Vic Piano · 10-30-2015, 06:04 PM

Hi Bill,

Nothing firm as yet, let me know what works best for you and we'll see if we can put things together around those dates. Before I forget, Happy Halloween, Trick or Treat.

BILL WZOREK · 10-31-2015, 11:30 AM

Anytime in Feb. or even the beginning of March is fine. if any of that works for you that's great.

Vic Piano · 10-31-2015, 05:14 PM

That narrows it down a bit... LOL I'll see what we can do. Hopefully we'll come up with firm dates in a few weeks.

Vic Piano · 11-02-2015, 11:34 AM

The fun just never ends...

This past Saturday I drove the '39 LZ up to the Hot Rod breakfast in Spring Hill, just over 50 miles. The car ran fine going up, and on the return trip however, when I pulled into my driveway and shut the ignition off I heard a bang from under the hood... I inspected things under the hood and didn't see anything amiss so, I fired her up and pulled into the garage. when I shut her off again, the same noise...

Mike and Keith came over this morning and I fired the LZ up while they watched things under the hood. Keith spotted the problem right away... the fan assembly had come loose and was spinning at an angle.

Several years ago I had the radiator rebuilt and at that time I inspected the fan assembly, everything looked ok at that time. The LZ's fan was redesigned for the '39 - '49 V-12. The blade assembly fits into a (for lack of a better term) cup like assembly. Between the fan and the cup is a molded rubber cushion. The fan assembly was made this way to reduce vibration. Unfortunately, the rubber is not reproduced and apparently no one has come up with a 'fix' for the problem when the rubber (now 76 years old) no longer functions... So, I need a good fan assembly for a '39 - '48 Lincoln Zephyr or Continental, or some ideas as to how I might be able to recondition the fan I've got... As always, help is appreciated. Thanks.

Lawson Cox · 11-02-2015, 12:51 PM

Hey Vick. Just imagine a fix. Then just git 'er done. LOL

Vic Piano · 11-02-2015, 05:31 PM

Hey Lawson, even though I was born in Atlanta, I don't spell my name with a K, imagine that... LOL I have no doubt that I'll fix the fan if I can't find a replacement... Isn't that part of the fun of messin' with Flatheads...

Bruce in southern OH · 11-02-2015, 09:29 PM

Vic, I will look for photo's of my 39, it did the same thing, Don P and I placed fan back in position in the rubber, then we drilled three holes and used 1/4" bolts/locks/nuts and bolted it in place. It works great, never a problem, original was held by vulcanized rubber and friction. Now it is centered by the old rubber and held with bolts, look at the thread on my LZ, Bruce

( https://www.fordbarn.com/forum/showth...uthern&page=10 )

Page 10 of "yes they are still out there #2 "

Lawson Cox · 11-02-2015, 09:36 PM

Quote:

Originally Posted by Vic Piano

Hey Lawson, even though I was born in Atlanta, I don't spell my name with a K, imagine that... LOL I have no doubt that I'll fix the fan if I can't find a replacement... Isn't that part of the fun of messin' with Flatheads...

Sorry to have misspelled your name.

I know better. Just fat fingers.

Vic Piano · 11-03-2015, 09:30 AM

Quote:

Originally Posted by Bruce in southern OH

Vic, I will look for photo's of my 39, it did the same thing, Don P and I placed fan back in position in the rubber, then we drilled three holes and used 1/4" bolts/locks/nuts and bolted it in place. It works great, never a problem, original was held by vulcanized rubber and friction. Now it is centered by the old rubber and held with bolts, look at the thread on my LZ, Bruce

( https://www.fordbarn.com/forum/showth...uthern&page=10 )

Page 10 of "yes they are still out there #2 "

Thanks Bruce, I appreciate your help.

10-20-2015, 07:34 PM	#2121
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: What I Did on My Lunch Hour Vic on Sunday is the billet proof drags in Lakeland. Hope to see you. It Maybe the last year. Come out and see what the zephyr runs on an 1/8 mile for 10 bucks! Run what ya bring or just have the ccf guys show. It'll be fun ��

10-21-2015, 08:38 AM	#2122
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Thanks Tinker, I know about the Billet Proof Drags in Lakeland, been there and done that, albeit not with the Zephyr... LOL. I've got a wedding this weekend that is taking up Saturday & Sunday , or I'd be in Dawsonville, GA at the Moonshine Festival... I'll be posting info on the 2016 Florida *"Barner's Bash"* as soon as we have a weekend selected. Hopefully you will be able to make it to the "Bash". Have fun at the Drags. __________________ Imagination is more important than knowledge.

10-21-2015, 11:10 AM	#2123
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour The Cigar City Flatheads T-Shirts are here, and they look super! Be sure to order yours today. All the T-Shirts (in the first order) are Extra Large. Cost for a shirt is $14.95 + $3.50 S&H (the shipping charge is good for up to three shirts). If you can't wait to be the first kid on your block to be sportin' a CCF T-Shirt, send a check or MO payable to Vic Piano, to: Vic Piano c/o Mizlou Television Network Inc. 7853 Gunn Hwy., Suite 343 Tampa, FL 33626. As always, we thank you for supporting the Cigar City Flatheads. __________________ Imagination is more important than knowledge.

10-22-2015, 06:17 AM	#2125
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Tinker, Yes, it's ok, everyone is invited to the "Barner's Bash" and you don't need to drive a Flathead to the event. As we get things firmed up I'll continue to post information both here and on the Cigar City Flatheads FaceBook page. Hope you can make it. As for the wedding... We'll see LOL __________________ Imagination is more important than knowledge.

10-22-2015, 02:30 PM	#2126
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Sponsored Links (Register now to hide all advertisements) __________________ Imagination is more important than knowledge.

10-23-2015, 02:13 PM	#2127
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Sorry to have to do this but... Here are the new Postage Rates for the Cigar City Flatheads T-Shirts. One shirt, $6.30, Two Shirts, $8.00. This is in addition to the cost of $14.95 per shirt. __________________ Imagination is more important than knowledge.

10-26-2015, 01:44 PM	#2128
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour __________________ Imagination is more important than knowledge.

10-29-2015, 08:10 AM	#2129
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour The good thing (I guess) is, the price of gas has come down recently. The bad thing is, the price of oil has gone up... I got very ambitious the other day and decided to change the oil & filters on several of our Flatheads... I went to the auto parts store and bought ten quarts of oil (they had a special where you could get an oil filter for free with the purchase of five quarts of a particular name brand of oil). I also bought some MMO, Engine Restorer (I use it in the LZ V-12), Brake Cleaner, and Gear Oil, all on sale. When I got to the check out, the bill came to over $100.00!!! Oh well, I guess what they say is true; if you want to play, you've got to pay... __________________ Imagination is more important than knowledge.

10-30-2015, 07:51 AM	#2130
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Thanks to everyone that took advantage of our 'low postage' offer for Cigar City Flatheads T-Shirts, we appreciate your support of the Cigar City Flatheads. __________________ Imagination is more important than knowledge.

10-30-2015, 02:31 PM	#2131
BILL WZOREK Senior Member Join Date: May 2010 Location: Florence Ma. Posts: 2,404	Re: What I Did on My Lunch Hour Vic, Any idea on the Bash dates? Lots of interest at the Wzorek homestead. Need to give my in-laws some idea of when we're coming so they can rent some ramps for there house to get me inside.

10-30-2015, 06:04 PM	#2132
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Hi Bill, Nothing firm as yet, let me know what works best for you and we'll see if we can put things together around those dates. Before I forget, Happy Halloween, Trick or Treat. __________________ Imagination is more important than knowledge.

10-31-2015, 11:30 AM	#2133
BILL WZOREK Senior Member Join Date: May 2010 Location: Florence Ma. Posts: 2,404	Re: What I Did on My Lunch Hour Anytime in Feb. or even the beginning of March is fine. if any of that works for you that's great.

10-31-2015, 05:14 PM	#2134
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour That narrows it down a bit... LOL I'll see what we can do. Hopefully we'll come up with firm dates in a few weeks. __________________ Imagination is more important than knowledge.

11-02-2015, 11:34 AM	#2135
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour The fun just never ends... This past Saturday I drove the '39 LZ up to the Hot Rod breakfast in Spring Hill, just over 50 miles. The car ran fine going up, and on the return trip however, when I pulled into my driveway and shut the ignition off I heard a bang from under the hood... I inspected things under the hood and didn't see anything amiss so, I fired her up and pulled into the garage. when I shut her off again, the same noise... Mike and Keith came over this morning and I fired the LZ up while they watched things under the hood. Keith spotted the problem right away... the fan assembly had come loose and was spinning at an angle. Several years ago I had the radiator rebuilt and at that time I inspected the fan assembly, everything looked ok at that time. The LZ's fan was redesigned for the '39 - '49 V-12. The blade assembly fits into a (for lack of a better term) cup like assembly. Between the fan and the cup is a molded rubber cushion. The fan assembly was made this way to reduce vibration. Unfortunately, the rubber is not reproduced and apparently no one has come up with a 'fix' for the problem when the rubber (now 76 years old) no longer functions... So, I need a good fan assembly for a '39 - '48 Lincoln Zephyr or Continental, or some ideas as to how I might be able to recondition the fan I've got... As always, help is appreciated. Thanks. __________________ Imagination is more important than knowledge.

11-02-2015, 12:51 PM	#2136
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: What I Did on My Lunch Hour Hey Vick. Just imagine a fix. Then just git 'er done. LOL __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

11-02-2015, 05:31 PM	#2137
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Hey Lawson, even though I was born in Atlanta, I don't spell my name with a K, imagine that... LOL I have no doubt that I'll fix the fan if I can't find a replacement... Isn't that part of the fun of messin' with Flatheads... __________________ Imagination is more important than knowledge.

11-02-2015, 09:29 PM	#2138
Bruce in southern OH Senior Member Join Date: May 2010 Location: Proctorville Posts: 1,582	Re: What I Did on My Lunch Hour Vic, I will look for photo's of my 39, it did the same thing, Don P and I placed fan back in position in the rubber, then we drilled three holes and used 1/4" bolts/locks/nuts and bolted it in place. It works great, never a problem, original was held by vulcanized rubber and friction. Now it is centered by the old rubber and held with bolts, look at the thread on my LZ, Bruce ( https://www.fordbarn.com/forum/showth...uthern&page=10 ) Page 10 of "yes they are still out there #2 " Last edited by Bruce in southern OH; 11-02-2015 at 10:21 PM. Reason: additional info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode