The Ford Barn

Joe in Ohio · 06-01-2010, 01:39 PM

Hello,
I have rebuilt and installed my 1929 7 tooth steering column and when the light switch is off it is in the 9 oclock position, What do I do to get it back in the 6 oclock position as it was before rebuild ?

MAG · 06-01-2010, 02:01 PM

Sponsored Links (Register now to hide all advertisements)

The "spider" needs to be turned 90 degrees from where it is presently located. Remove the headlight switch. Push the "spider" up and remove the clip. Remove the spider. Turn the spider 90 degrees and re-install the clip and switch. Luck......

06-01-2010, 01:39 PM	#1
Joe in Ohio Junior Member Join Date: May 2010 Location: Saint Clairsville, Ohio Posts: 17	Light switch help needed ? Hello, I have rebuilt and installed my 1929 7 tooth steering column and when the light switch is off it is in the 9 oclock position, What do I do to get it back in the 6 oclock position as it was before rebuild ?

06-01-2010, 02:01 PM	#2
MAG Senior Member Join Date: May 2010 Location: Austin, Texas Posts: 925	Re: Light switch help needed ? Sponsored Links (Register now to hide all advertisements) The "spider" needs to be turned 90 degrees from where it is presently located. Remove the headlight switch. Push the "spider" up and remove the clip. Remove the spider. Turn the spider 90 degrees and re-install the clip and switch. Luck......