|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-11-2016, 03:06 AM | #1 |
Senior Member
Join Date: Sep 2012
Location: Eureka, California
Posts: 1,716
|
MAC's Model A parts and Service - Any Good Reports?
There have been quite a few posts on this forum regarding negative reports about MAC'S Model A parts and service.
I have never ordered from MAC'S or had any dealings with them, I only have read all the negative comments here on the Forum. Today however, I did spend some time purusing their catalog, and I found it useful, informative and well laid out. How about a thread that just relates the positive reports of good parts and good service. Please - nothing negative on this particular thread - there have been plenty of the negative already reported - no need to beat a dead horse with a lot of redundancy. We all have read LOTS of bad reports about MAC'S, but now I would like hear only the GOOD side of the discussion. |
12-11-2016, 04:03 AM | #2 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: MAC's Model A parts and Service - Any Good Reports?
I have 6 Model A Fords and 90 % of my parts come from Macs. I have had minor problems but every one has been resolved satisfactorily. They also have the very best catalogue. Many of the people that criticize them are constant complainers or following the example of a group leader. Many frugile / cheap Barners want high quality for low price which rarely happens in a retail market. On the reverse side, if you are happy with your present vendor why change? Wayne.
Last edited by C26Pinelake; 12-11-2016 at 09:08 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
12-11-2016, 04:07 AM | #3 |
Member
Join Date: Apr 2015
Location: Tamborine Mountain,Queensland, Australia
Posts: 85
|
Re: MAC's Model A parts and Service - Any Good Reports?
I've been getting all my spares through Mac's for the past 18 months and have not had any reason to change i generally receive my order within 10 days of sending my order, that is to Australia. Postage is very reasonable.
On a couple of occasions I have had to report a defective part and have had them replaced at no cost . Their web site is easy to locate parts. |
12-11-2016, 04:37 AM | #4 |
Senior Member
Join Date: Jul 2010
Location: Belgistan (formerly known as Belgium)
Posts: 573
|
Re: MAC's Model A parts and Service - Any Good Reports?
I placed orders 3 times in the last two months, first time I had my package within 3 days (placed order on friday evening/EU and received package on monday!) Second and third time it took longer because some parts weren't in stock and they did not email me about that. If I order something I need the parts to be shipped right away, I can not wait days/weeks for parts in back order. What they don't have I don't need, I will order at another supplier. Shipping prices for EU are the cheapest at Mac's.
|
12-11-2016, 08:55 AM | #5 |
Senior Member
Join Date: Mar 2012
Location: Fairfield, Virginia
Posts: 615
|
Re: MAC's Model A parts and Service - Any Good Reports?
I have not ordered from them recently, but I have never had any problems they didn't solve quickly.
|
12-11-2016, 09:06 AM | #6 |
Senior Member
Join Date: Oct 2012
Location: Grawn , Michigan
Posts: 105
|
Re: MAC's Model A parts and Service - Any Good Reports?
Sponsored Links (Register now to hide all advertisements)
|
12-11-2016, 09:16 AM | #7 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: MAC's Model A parts and Service - Any Good Reports?
Thousands of satisfied customers totally disagree with you. What proof do you have to substantiate your blanket statement? Please note that the original post asked for no negative comments. Wayne
Last edited by C26Pinelake; 12-11-2016 at 09:34 AM. |
12-11-2016, 09:27 AM | #8 |
Senior Member
Join Date: Jun 2013
Location: west grove Pa.
Posts: 238
|
Re: MAC's Model A parts and Service - Any Good Reports?
|
12-11-2016, 09:34 AM | #9 |
Senior Member
Join Date: Jul 2014
Location: Near Boston
Posts: 135
|
Re: MAC's Model A parts and Service - Any Good Reports?
I have ordered from Mac's for several years and I have never had a reason to be dissatisfied.
|
12-11-2016, 09:55 AM | #10 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: MAC's Model A parts and Service - Any Good Reports?
|
12-11-2016, 10:00 AM | #11 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,509
|
Re: MAC's Model A parts and Service - Any Good Reports?
Quote:
My suggestion is everyone steer clear of buying from MACs if you truly are interested in the quality of parts. |
|
12-11-2016, 10:10 AM | #12 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,162
|
Re: MAC's Model A parts and Service - Any Good Reports?
This string could be fairly short if all the posts are from ONLY people satisfied with MAC's. I concur with Brent about MAC's - I wont go any farther than that even though I could. I would recommend doing a search here on Fordbarn for MAC's for a true and honest assessment of MAC's.
Rusty Nelson |
12-11-2016, 10:31 AM | #13 | |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: MAC's Model A parts and Service - Any Good Reports?
Quote:
|
|
12-11-2016, 10:48 AM | #14 |
Senior Member
Join Date: Jul 2010
Location: Belgistan (formerly known as Belgium)
Posts: 573
|
Re: MAC's Model A parts and Service - Any Good Reports?
|
12-11-2016, 10:53 AM | #15 |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: MAC's Model A parts and Service - Any Good Reports?
I do like thier catalog and the diagrams are nice and easy to read too. Cant say I've orders thru them though. To me the way I see it MACS is like the jcwhitney for model a parts while Snyders, brattons, etc are the specialty shops that you can call and they know what they are talking about.
__________________
1929 Model AA - Need long splash aprons! |
12-11-2016, 10:59 AM | #16 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: MAC's Model A parts and Service - Any Good Reports?
I've gotten items from them, no issue.
__________________
I know the voices aren't real but damn they have some good ideas! |
12-11-2016, 11:38 AM | #17 | |
Senior Member
Join Date: Apr 2016
Location: Bellingham, WA
Posts: 1,163
|
Re: MAC's Model A parts and Service - Any Good Reports?
Quote:
My guess is that if we succeed in driving Mac's out of business, many of our reproduced parts will disappear altogether, quality on some remaining ones will go down, and all prices will go up. I suggest we order from our favorite supplier(s) and leave it at that. We are super fortunate to have ALL the suppliers we have.
__________________
All steel from pedal to wheel |
|
12-11-2016, 11:48 AM | #18 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,509
|
Re: MAC's Model A parts and Service - Any Good Reports?
Quote:
Definitely one way to look at it. On the other hand, some of those disappeared items may just return however this time offered in a better quality. Remember, --a manufacturer cannot make a good quality item when the competition is too great with an inferior product. A good example is shackles. I know of at least one manufacturer that was working on producing a good quality shackle however the pricing would be more than the India-made ones are. Too big of a chance with the $$ investment to offer a quality piece when folks seemingly want to buy the cheap ones. |
|
12-11-2016, 12:05 PM | #19 |
Senior Member
Join Date: May 2012
Location: Las Vegas
Posts: 138
|
Re: MAC's Model A parts and Service - Any Good Reports?
I ordered a cam thrust plunger and spring from them for $3.75. Shipping was $18 because they put it in a 12x4x4 box. It arrived quickly and was not damaged.
__________________
kris |
12-11-2016, 12:18 PM | #20 |
Senior Member
Join Date: Oct 2015
Location: Bay City Michigan
Posts: 1,050
|
Re: MAC's Model A parts and Service - Any Good Reports?
50/50 which is bad. some of the parts worked others were full failures. I bought a mirror to attach to the door. and it has zero resistance on the joint all flop no hold and i mean zero hold. and that is a "macs" product. I have had better luck with berts and mikes a fordable. mikes has low cost parts but i wasn't happy with the points set from mikes but with 20 min of bending and tuning they sit right but i would say buy points from somewhere else. I haven't tried Snyder yet. I ordered from tams but cant remember what it was so must have been ok. But in short macs sends shit products out for model a's and puts there name on the box they asked for the bad reputation they have.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|