Sat morning "late crab" work....

[BUBBAS IGNITION]

Sat catch up ( always behind) , Terry cleaned this one up and laid it on my bench that said "different".
What he was refering to i dont see often so i thought i would share just as a info only??
The later 46-47-48 Crabs used a two piece distributor cap often refered to as a rabbitt ear cap. Most of these have a cap locating pin that is internal as well as external for the use of both caps. Crab and Rabbitt.
This case is internal only and doesnt have the external machined for the crab style cap , making it only for the later cap. Not really a big deal but out of a few hundred we do each year this is the only one i have seen???

[BUBBAS IGNITION]

another picture

[Russ/40]

When I was doing distributors for Remund, a couple hundred or so, never saw one like that. Off shore production?

[BUBBAS IGNITION]

Originally Posted by Russ/40

When I was doing distributors for Remund, a couple hundred or so, never saw one like that. Off shore production?

beats me , it had a rebuilt tag on it when we got it??????

[cas3]

same as one i gave you a couple years ago for show and tell, is it not?

[BUBBAS IGNITION]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by cas3

same as one i gave you a couple years ago for show and tell, is it not?

yep it is.....

[40larry]

Originally Posted by BUBBAS IGNITION

yep it is.....

What was the part number of the NAPA condenser that you recommend using with the Bosch Blue Coil and Crab distributor on 12 volt?

[BUBBAS IGNITION]

Originally Posted by 40larry

What was the part number of the NAPA condenser that you recommend using with the Bosch Blue Coil and Crab distributor on 12 volt?

I use the FA54 with the crab units. Seems to be a really good unit....

[40larry]

Originally Posted by BUBBAS IGNITION

I use the FA54 with the crab units. Seems to be a really good unit....

Thanks. I ordered one to pick up tomorrow.........

[Gary Duff]

Russ/40
Is mickey still in the clink? Gary

[Russ/40]

Originally Posted by Gary Duff

Russ/40
Is mickey still in the clink? Gary

Yes

[Black Fifty]

Originally Posted by BUBBAS IGNITION

Sat catch up ( always behind) , Terry cleaned this one up and laid it on my bench that said "different".
What he was refering to i dont see often so i thought i would share just as a info only??
The later 46-47-48 Crabs used a two piece distributor cap often refered to as a rabbitt ear cap. Most of these have a cap locating pin that is internal as well as external for the use of both caps. Crab and Rabbitt.
This case is internal only and doesnt have the external machined for the crab style cap , making it only for the later cap. Not really a big deal but out of a few hundred we do each year this is the only one i have seen???

Jim,
Do your Dell a favor and vacuum the front fan vents!
Mike

[rotorwrench]

It may have been early 59 production. There is a possibility that it could be wartime production since the rabbit ear was likely developed for military use. The military always wants stuff sealed up to the hilt and the rabbit ear set up is in that category.


He is like me on my shop computer. They are the last thing we think about until it's broke.

[BUBBAS IGNITION]

Originally Posted by rotorwrench

It may have been early 59 production. There is a possibility that it could be wartime production since the rabbit ear was likely developed for military use. The military always wants stuff sealed up to the hilt and the rabbit ear set up is in that category.


He is like me on my shop computer. They are the last thing we think about until it's broke.

And then just buy another one on ebay for $88 bucks......??

https://www.ebay.com/itm/Dell-OptiPl...JRwy:rk:7:pf:0

me and my friends have bought 5-6 of these , work like a champ........