|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-18-2020, 09:30 AM | #1 |
Member
Join Date: Feb 2015
Location: Big Island of Hawai`i
Posts: 43
|
Flywheel wobble
I did a flywheel wobble test. Came up with an 0.008 variance, Limit is supposed to be 0.005. What do I do now?
|
01-18-2020, 10:33 AM | #2 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,426
|
Re: Flywheel wobble
First thing to try after carefully inspecting the flange, dowels, & mounting surface of the flywheel, is to try installing it at 180 degrees from the first location and checking it again. If it's still out of spec, a person should check the crank flange and see what kind of flange end runout is there. It can be trued up if need be. The flywheel can also be chucked in a lathe and checked for warpage.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-18-2020, 10:38 AM | #3 |
Senior Member
Join Date: Jan 2019
Location: Florida Panhandle
Posts: 585
|
Re: Flywheel wobble
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|