|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-17-2019, 08:12 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: big house
Posts: 343
|
HELP what fender is this???
here is a fender I was told it was for a 1940-41 ford pickup there is no crease in the middle of the fender at the top. PLEASE HELP ME IDENTIFY THIS CAUSE IT COST ME A LOT OF MONEY!!
|
07-17-2019, 10:04 PM | #2 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,165
|
Re: HELP what fender is this???
I'm assuming this is for the rear of the truck. Doesn't look right to me. Should be a crown the length of the fender. The front of the fender should have a flat that extends out slightly to meet the running board (Sim to your '37). Also the inside mounting flange doesn't look like it would fit the high and low panels of the side of the box. FYI the '38 through '41 1/2T rear fenders are the same.
Hard to tell for sure from the photos but its possible that somebody who didn't know what they were doing tried to learn metal working and totally screwed it up. Maybe somebody will recognize what its from. Some of the early Chevy trucks looked very sim. If you look at Mart's video you will get a good look as he removes his rear fender @ 4:50 into the flick. https://www.youtube.com/watch?v=5Cn-...ature=youtu.be Last edited by 38bill; 07-17-2019 at 10:15 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
07-17-2019, 10:39 PM | #3 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,013
|
Re: HELP what fender is this???
Looks similar to the fender on the Studebaker bed some farmer back in the day installed on my '39 p/u. I'll try and post a photo tomorrow if that will help.
__________________
Making the simple complicated for over 30 years. |
07-18-2019, 05:12 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 886
|
Re: HELP what fender is this???
Kinda looks like it has been altered , not like any of my 40/47 ford pickup fenders .
|
07-18-2019, 05:43 PM | #5 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,745
|
Re: HELP what fender is this???
My 41 pickup fenders are different. The holes are round. I can't say what it is, but I can say it isn't 40/41 Ford pickup, or 46 up either because the holes are round in those too.
It does look like a pickup fender, though, due to the flat mounting face. Sorry if this is not what you want to hear. Mart. Forgot to say, I did a video recently which shows a 41 fender in some detail. You will see what I mean if you watch it. https://youtu.be/5Cn-PiffIlM Edit2: Didn't see the link above! Last edited by Mart; 07-18-2019 at 06:41 PM. |
07-18-2019, 05:50 PM | #6 |
Senior Member
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
|
Re: HELP what fender is this???
Sponsored Links (Register now to hide all advertisements)
|
07-18-2019, 06:48 PM | #7 |
Senior Member
Join Date: Jun 2010
Location: big house
Posts: 343
|
Re: HELP what fender is this???
thank you fellas for the quick response I only wish I could get the ford barn member to man up and give me my money back. please beware of this member since 2010 rpm1 maybe we can remove him from the sight. karma!
|
07-18-2019, 07:00 PM | #8 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,029
|
Re: HELP what fender is this???
Not a ford fender. Since it's a right side rear fender there is also no depression for the spare tire. The seller needs to step to the plate and take care of business.
|
07-20-2019, 09:37 AM | #9 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,698
|
Re: HELP what fender is this???
jplawman, send a PM the administrator "RYAN". He may be able to help or eliminate the culprit.
Sal |
|
|
Sponsored Links (Register now to hide all advertisements) |
|