The Ford Barn

mrtexas · 05-17-2012, 08:35 PM

I googled around today and the only rear tube shock setup I found was one where the bottom attachment is welded to the rear end case? Anything else available not involving welding for rear tube shocks?

40cpe · 05-17-2012, 08:48 PM

the link below shows the option to mount to the backing plate. You will still need upper mounts

http://www.ebay.com/sch/i.html?_odkw...mount&_sacat=0

05-17-2012, 08:35 PM	#1
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,186	Tube shocks for rear question for a 36 I googled around today and the only rear tube shock setup I found was one where the bottom attachment is welded to the rear end case? Anything else available not involving welding for rear tube shocks?

05-17-2012, 08:48 PM	#2
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 3,392	Re: Tube shocks for rear question for a 36 the link below shows the option to mount to the backing plate. You will still need upper mounts http://www.ebay.com/sch/i.html?_odkw...mount&_sacat=0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode