Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-06-2019, 06:48 PM   #1
ericr
Senior Member
 
ericr's Avatar
 
Join Date: Apr 2012
Posts: 1,302
Default Stupid Question #2: how does an iron frame act as a ground on our cars

-or any car, for that matter. but I'll bet some of us have wondered about this.


our cars are DC of course, meaning, apparently, that there is a constant flow of electrons through the system when some application is using electricity. how can a frame of iron/steel act as a successful conductor for one pole of the battery?


We don't associate iron/steel as being a significant conductor in other contexts....how can it be successful in electrical transmission on a car?
ericr is offline   Reply With Quote
Old 09-06-2019, 07:02 PM   #2
Jacksonlll
Senior Member
 
Jacksonlll's Avatar
 
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,277
Send a message via ICQ to Jacksonlll
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

The structure is so big there is very little losses. No reason to use silver or copper. It’s just another big wire.
Jacksonlll is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-06-2019, 07:32 PM   #3
Railcarmover
BANNED
 
Join Date: Apr 2017
Location: Sacramento
Posts: 1,262
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

One thing is for sure,a ground strap from the battery to the frame and from the frame to the driveline is critical if you don't have splash pans.

if you don't believe steel is a good conductor then you haven't had a full childhood..
Railcarmover is offline   Reply With Quote
Old 09-06-2019, 07:35 PM   #4
Bruce of MN
Senior Member
 
Bruce of MN's Avatar
 
Join Date: May 2010
Location: VA
Posts: 654
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Quote:
Originally Posted by Railcarmover View Post

if you don't believe steel is a good conductor then you haven't had a full childhood..
Hah, that's pretty good!
Bruce of MN is offline   Reply With Quote
Old 09-06-2019, 07:35 PM   #5
History
Senior Member
 
History's Avatar
 
Join Date: Oct 2017
Location: NC Mountains
Posts: 375
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Quote:
Originally Posted by Railcarmover View Post
if you don't believe steel is a good conductor then you haven't had a full childhood..
Or peed on an electric fence.
History is offline   Reply With Quote
Old 09-06-2019, 07:39 PM   #6
aermotor
Senior Member
 
Join Date: Mar 2015
Location: Greenville, SC
Posts: 732
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

No problem according to Myth Busters.

John
aermotor is offline   Reply With Quote
Old 09-07-2019, 12:00 AM   #7
Magicbox51
Senior Member
 
Magicbox51's Avatar
 
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 575
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Steel and iron are excellent conductors of electricity. The frame is used instead of running a "common" grond wire. It was a pretty common practice back in the day and was part of keeping the cost of cars down. Separate ground wires are better, and used a lot more on modern cars because so much of new cars are made using plastic parts which don't conduct electricity.
__________________
-Bill G
Magicbox51 is offline   Reply With Quote
Old 09-07-2019, 01:27 AM   #8
Mike V. Florida
Senior Member
 
Mike V. Florida's Avatar
 
Join Date: May 2010
Location: South Florida
Posts: 14,022
Send a message via AIM to Mike V. Florida
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Quote:
Originally Posted by Magicbox51 View Post
Steel and iron are excellent conductors of electricity. The frame is used instead of running a "common" grond wire. It was a pretty common practice back in the day and was part of keeping the cost of cars down. Separate ground wires are better, and used a lot more on modern cars because so much of new cars are made using plastic parts which don't conduct electricity.



Not just "back in the day" but even today. imagine the cost, weight, and complexity of running two wires to every single part of a car that needs electricity. I'm not saying there are no components that use two wires but there are a whole bunch that do not.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
Mike V. Florida is offline   Reply With Quote
Old 09-07-2019, 03:06 AM   #9
johnbuckley
Senior Member
 
johnbuckley's Avatar
 
Join Date: Jul 2010
Location: United Kingdom
Posts: 1,119
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

this is fun site for checking voltage drop and resistance https://www.rapidtables.com/calc/wir...alculator.html
johnbuckley is offline   Reply With Quote
Old 09-07-2019, 05:24 AM   #10
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,206
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

AH, so thats why I feel all tingly whenever I get in the car !
Patrick L. is offline   Reply With Quote
Old 09-07-2019, 09:22 AM   #11
ericr
Senior Member
 
ericr's Avatar
 
Join Date: Apr 2012
Posts: 1,302
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Quote:
Originally Posted by Railcarmover View Post
One thing is for sure,a ground strap from the battery to the frame and from the frame to the driveline is critical if you don't have splash pans.

if you don't believe steel is a good conductor then you haven't had a full childhood..

Not so....you know what they say about Dad and Mom being in the iron and steel business.
ericr is offline   Reply With Quote
Old 09-07-2019, 07:29 PM   #12
Cool Hand Lurker
Senior Member
 
Cool Hand Lurker's Avatar
 
Join Date: May 2010
Location: So Minn
Posts: 1,457
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Don't look on it as a "ground", look at it as a big conductor hooked to one side of the battery. The critical factor in completing a circuit that works lies in the quality of the connections to the conductors between the battery and the component to be powered. Clean connections will make good contact, dirty or corroded connections may not let the current through.
Cool Hand Lurker is offline   Reply With Quote
Old 09-07-2019, 08:07 PM   #13
holdover
Senior Member
 
Join Date: May 2011
Location: SW Virginia near the Blue ridge Parkway
Posts: 577
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Steel works pretty good, that is how power gets to your house
holdover is offline   Reply With Quote
Old 09-07-2019, 11:05 PM   #14
Railcarmover
BANNED
 
Join Date: Apr 2017
Location: Sacramento
Posts: 1,262
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

'Sand Pebbles" with Steve McQueen.. Master Chin,head coolie of the engine room said there are wizards,wizards in the engine....

Railcarmover is offline   Reply With Quote
Old 09-08-2019, 07:29 AM   #15
ericr
Senior Member
 
ericr's Avatar
 
Join Date: Apr 2012
Posts: 1,302
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

well gang, I confess I fibbed a little bit. I read in my book about Henry Ford and the D T & I that when he bought the line, it had iron telegraph wires, but they had corroded significantly.


But if iron is an acceptable conductor, I don't see why it doesn't replace copper, which the US is not well-endowed with.
ericr is offline   Reply With Quote
Old 09-08-2019, 08:48 AM   #16
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,206
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

I'm not sure I would want a frame of iron, I prefer steel. I really don't think I'd want one of copper, even if it could be afforded
Patrick L. is offline   Reply With Quote
Old 09-08-2019, 09:25 AM   #17
jrelliott
Senior Member
 
jrelliott's Avatar
 
Join Date: May 2010
Location: Pine, AZ
Posts: 658
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Note to ericr, Arizona and a lot of other states have abundant supplies of copper. EPA and OSHA and other agencies have made it difficult to mine cost effectively. Smelters put out a lot of undesirable byproducts. Cant get a mine open near Superior, AZ as it is on a sacred site per the native americans.
jrelliott is offline   Reply With Quote
Old 09-08-2019, 10:17 AM   #18
Railcarmover
BANNED
 
Join Date: Apr 2017
Location: Sacramento
Posts: 1,262
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

The perceived dearth of American copper was magnified during WW2,all copper available was diverted to the war effort. Some interesting things about that...we all know about the zinc penny in '43..but did you know the calutrons used to enrich uranium for the bomb used electromagnets wound with pure silver? it was 'borrowed' from the Treasury,and had to be accounted for to the ounce..


Mining and smelting capacity increased by the end of the war,we began using our vast reserves of copper ore..we are currently 4th in the world in production.

A German would appreciate that,they were on the receiving end of most of our copper..


Last edited by Railcarmover; 09-08-2019 at 10:30 AM.
Railcarmover is offline   Reply With Quote
Old 09-08-2019, 10:44 AM   #19
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 2,949
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

Steel or iron isn't used as wire for the reason stated, it corrodes, rusts, easily.
Jim Brierley is offline   Reply With Quote
Old 09-08-2019, 11:17 AM   #20
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 10,445
Default Re: Stupid Question #2: how does an iron frame act as a ground on our cars

A lot of metals can be used as conductors but some are definitely better than others. It's all about resistance or the need for very low resistance levels. The longer a conductor the higher the resistance. Steel and other ferromagnetic related alloys do OK but corrode easily as already mentioned. Aluminum and copper are the least expensive of the metals that make good wire. Silver and gold are much better but obviously much more expensive. The alternate is to plate wire with tin, silver, or gold to reduce contact resistance. With gold being so very expensive, it is limited to plating for terminal pins and sockets so as not to break the bank. Aluminum wire has to have a larger cross section gauge to replace copper but it is used a lot in power transmission wires we see on the side of the road every day. Aircraft wire is available in silver plated copper for better conductivity or tin plated copper for better corrosion resistance. Copper is king in the automotive business with tin plated copper as a more expensive alternative to bare copper.
rotorwrench is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:35 AM.