|
Sponsored Links (Register now to hide all advertisements) |
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Jul 2017
Posts: 22
|
![]()
I was returning home from a car show this afternoon when the front end started shaking. sort of scared me. I pulled over and checked the front wheels. I grabbed the wheel to see if there was any play. There was none. I looked around at the perches, drag link shocks. every thing seem fine. I started the model A up and drove the rest of the way home with no problems.
Has anyone experienced this and what could it be? |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Oct 2017
Location: NC Mountains
Posts: 375
|
![]()
Search for "Death Wobble" on this site.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
![]() |
#3 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 4,507
|
![]()
Do a search on "Death Wobble" here. It has been discussed MANY times.
BTW, what oil do you use??! ![]() Here's one result to that search. https://www.fordbarn.com/forum/showt...t=death+wobble
__________________
Pulsing like a beacon through the days and nights, one's birthplace sends out its invisible waves of recollection. It always has and it always will, until even the last of us come home. : Clive James |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,461
|
![]()
The first thing I'd do is make sure the toe-in is 1/16" and make sure the front wheel bearings aren't too loose. My temporary front axle is worn very sloppy, but I've never had the death wobble.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2012
Location: Central Maine
Posts: 477
|
![]()
check for tightness in the wishbone on the axle and at the back end of it.
|
![]() |
![]() |
![]() |
#6 | |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 1,857
|
![]() Quote:
John
__________________
Welcome each day |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jun 2010
Location: Polk City, Iowa
Posts: 505
|
![]()
I had a death wobble in my coupe. Could not stop it from occasionally happening until I replaced the rubber ball mentioned in post #6 with an original system. This affected the caster and the original system fixed it. Went for several yers until I sold it.. never a problem again.
__________________
Steve Hanna, Polk City, IA |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |