The Ford Barn

Seth Swoboda · 08-12-2019, 08:24 AM

I think the addition of Ford bolts complements your existing business perfectly.

Folks you really need to check out Third Gen Automotive for all of your early Ford parts needs. The service is the best, prices are great, knowledge is off the charts. Support Michael and Jane at Third Gen Automotive. Their contribution to our hobby is invaluable.

Congratulations and best of luck Michael and Jane.

jkflathead · 08-12-2019, 08:31 AM

Best of luck Michael. You and your family are working hard to keep the spirit of the early Ford V-8 alive and on the road. Onward!

V8ER · 08-12-2019, 08:36 AM

Congratulations Michael! As this thread demonstrates, you have, and will continue to have, broad support across the hobby.

Ricosan · 08-12-2019, 08:54 AM

This is wonderful news! Can’t wait!

Richard

Don W/Norfolk · 08-12-2019, 09:18 AM

Congrats, Michael. Best wishes for great success! Thank you very much. dw

JWL · 08-12-2019, 10:03 AM

Sponsored Links (Register now to hide all advertisements)

Good show !! Obviously a popular and needed endeavor.

Good Luck,
JWL

4dFord/SC · 08-12-2019, 11:18 AM

Any interest in interior kits? Had to ask;-)

Kerk · 08-12-2019, 11:25 AM

Great News ! AGREE with all the above (plusses sp! ) kerk

rotorwrench · 08-12-2019, 12:23 PM

Along with post #40, cad plating is done by most of the older propeller overhaul repair stations. There are so many parts that were originally cadmium plated that most all of them do it. The only problem is that many only use type II cadmium processes which has more of a gold finish than the type 1 silver finish. There is bound to be an outfit somewhere in Tennessee that can do the work you need though.

32phil · 08-12-2019, 01:04 PM

Best Of Luck Michael !!

deuce5wndw · 08-12-2019, 01:10 PM

Thanks Michael!!

done4 · 08-12-2019, 02:22 PM

Wow, this is great news! Roy was a treasure and I'm so happy to see his dream live on. Thank you Sir.

Hal Beatty · 08-12-2019, 02:26 PM

Thank you Micheal, this is a big deal for all of us!

A bones · 08-12-2019, 04:08 PM

All of that goes for me as well!

meric42 · 08-12-2019, 04:43 PM

Great job Michael, I look forward to supporting you in this new venture and keenly anticipate the grand opening in October. Cheers, Meric Hoffman, (NZ)

Tim Ayers · 08-12-2019, 05:51 PM

Quote:

Originally Posted by rotorwrench

Along with post #40, cad plating is done by most of the older propeller overhaul repair stations. There are so many parts that were originally cadmium plated that most all of them do it. The only problem is that many only use type II cadmium processes which has more of a gold finish than the type 1 silver finish. There is bound to be an outfit somewhere in Tennessee that can do the work you need though.

Is there black cadmium plating? All of the bolts I've ever bought from Roy were a satin black color.

DavidG · 08-12-2019, 06:33 PM

That's what Ford designated as its S-2 finish, namely black oxide with an oil coating. The cadmium plating fasteners that Roy offered were plated with so-called white cadmium, the same as Ford used during the period. It was used originally for intake manifold and water pump bolts and washers, body to frame fasteners, glove box fasteners, etc.

Talkwrench · 08-12-2019, 06:47 PM

The best of luck to you Michael, hope all goes well.

hotrodA · 08-12-2019, 07:05 PM

Michael,
There isn't a better person than you to take this on.
Best wishes to you and Jane.

1934 · 08-12-2019, 07:37 PM

Good for you, Michael. Best of luck to you!

08-12-2019, 08:24 AM	#41
Seth Swoboda Senior Member Join Date: May 2010 Location: Southern Illinois Posts: 3,779	Re: Roy Nacewicz's business, and it's future I think the addition of Ford bolts complements your existing business perfectly. Folks you really need to check out Third Gen Automotive for all of your early Ford parts needs. The service is the best, prices are great, knowledge is off the charts. Support Michael and Jane at Third Gen Automotive. Their contribution to our hobby is invaluable. Congratulations and best of luck Michael and Jane.

08-12-2019, 08:31 AM	#42
jkflathead Senior Member Join Date: May 2010 Posts: 679	Re: Roy Nacewicz's business, and it's future Best of luck Michael. You and your family are working hard to keep the spirit of the early Ford V-8 alive and on the road. Onward!

08-12-2019, 08:36 AM	#43
V8ER Senior Member Join Date: May 2010 Location: near Pittsburgh, PA Posts: 402	Re: Roy Nacewicz's business, and it's future Congratulations Michael! As this thread demonstrates, you have, and will continue to have, broad support across the hobby.

08-12-2019, 08:54 AM	#44
Ricosan Senior Member Join Date: May 2018 Location: Tallahassee Posts: 375	Re: Roy Nacewicz's business, and it's future This is wonderful news! Can’t wait! Richard

08-12-2019, 09:18 AM	#45
Don W/Norfolk Senior Member Join Date: May 2010 Location: Norfolk, VA Posts: 127	Re: Roy Nacewicz's business, and it's future Congrats, Michael. Best wishes for great success! Thank you very much. dw __________________ I love this country; it's the damn idiots running the government I'm afraid of.

08-12-2019, 10:03 AM	#46
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: Roy Nacewicz's business, and it's future Sponsored Links (Register now to hide all advertisements) Good show !! Obviously a popular and needed endeavor. Good Luck, JWL

08-12-2019, 11:18 AM	#47
4dFord/SC Senior Member Join Date: May 2010 Location: Columbia, SC Posts: 1,579	Re: Roy Nacewicz's business, and it's future Any interest in interior kits? Had to ask;-)

08-12-2019, 11:25 AM	#48
Kerk Senior Member Join Date: May 2010 Posts: 642	Re: Roy Nacewicz's business, and it's future Great News ! AGREE with all the above (plusses sp! ) kerk

08-12-2019, 12:23 PM	#49
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,420	Re: Roy Nacewicz's business, and it's future Along with post #40, cad plating is done by most of the older propeller overhaul repair stations. There are so many parts that were originally cadmium plated that most all of them do it. The only problem is that many only use type II cadmium processes which has more of a gold finish than the type 1 silver finish. There is bound to be an outfit somewhere in Tennessee that can do the work you need though.

08-12-2019, 01:04 PM	#50
32phil Senior Member Join Date: May 2010 Location: Montgomery, NY & Port St. Lucie Florida Posts: 935	Re: Roy Nacewicz's business, and it's future Best Of Luck Michael !! __________________ Early Ford Lock & Key Service https://www.fordbarn.com/forum/showthread.php?t=46583

08-12-2019, 01:10 PM	#51
deuce5wndw Senior Member Join Date: May 2010 Location: Liberty, KY Posts: 899	Re: Roy Nacewicz's business, and it's future Thanks Michael!!

08-12-2019, 02:22 PM	#52
done4 Senior Member Join Date: May 2010 Location: Union Pier MI Posts: 392	Re: Roy Nacewicz's business, and it's future Wow, this is great news! Roy was a treasure and I'm so happy to see his dream live on. Thank you Sir. __________________ Still smokin tires and cigars

08-12-2019, 02:26 PM	#53
Hal Beatty Senior Member Join Date: Jul 2012 Location: Bellingham, WA Posts: 213	Re: Roy Nacewicz's business, and it's future Thank you Micheal, this is a big deal for all of us!

08-12-2019, 04:08 PM	#54
A bones Senior Member Join Date: May 2010 Location: CLAYTON DE Posts: 1,282	Re: Roy Nacewicz's business, and it's future All of that goes for me as well! __________________ Enjoy yer day. Tom Hate can't fix what it started.

08-12-2019, 04:43 PM	#55
meric42 Senior Member Join Date: Aug 2010 Location: Blenheim, New Zealand Posts: 877	Re: Roy Nacewicz's business, and it's future Great job Michael, I look forward to supporting you in this new venture and keenly anticipate the grand opening in October. Cheers, Meric Hoffman, (NZ) __________________ I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand https://www.fordbarn.com/forum/album.php?albumid=580

08-12-2019, 06:33 PM	#57
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,093	Re: Roy Nacewicz's business, and it's future That's what Ford designated as its S-2 finish, namely black oxide with an oil coating. The cadmium plating fasteners that Roy offered were plated with so-called white cadmium, the same as Ford used during the period. It was used originally for intake manifold and water pump bolts and washers, body to frame fasteners, glove box fasteners, etc.

08-12-2019, 06:47 PM	#58
Talkwrench Senior Member Join Date: Aug 2012 Location: Perth, Western Australia Posts: 2,687	Re: Roy Nacewicz's business, and it's future The best of luck to you Michael, hope all goes well. __________________ *"Came too close to dying to stop living now!"*

08-12-2019, 07:05 PM	#59
hotrodA Senior Member Join Date: May 2010 Location: Rogersville, TN Posts: 797	Re: Roy Nacewicz's business, and it's future Michael, There isn't a better person than you to take this on. Best wishes to you and Jane.

08-12-2019, 07:37 PM	#60
1934 Senior Member Join Date: Jul 2010 Location: Quebec, Canada Posts: 415	Re: Roy Nacewicz's business, and it's future Good for you, Michael. Best of luck to you!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode