|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-03-2019, 05:43 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Indiana
Posts: 338
|
41 ford radiator mounting?
Can someone post some pictures of how the radiator mounts in a 41 ford car? I used to have a 46, and it had pieces that attached to the inner fenders that the sides of the radiator attached to. I don't see these on my 41. Am I missing some pieces?
Any and all help is appreciated. Thanks Matt
__________________
"..Nothin' outrun my V8 Ford" (Chuck Berry) S.M.I.B. |
03-03-2019, 07:22 PM | #2 |
Member
Join Date: Oct 2014
Location: peoria az.
Posts: 38
|
Re: 41 ford radiator mounting?
it bolts to the frame with braces to inner finder
|
Sponsored Links (Register now to hide all advertisements) |
|
03-03-2019, 08:00 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Indiana
Posts: 338
|
Re: 41 ford radiator mounting?
Were the braces just small brackets or were they like the 46 style with deflectors ?
Thanks matt
__________________
"..Nothin' outrun my V8 Ford" (Chuck Berry) S.M.I.B. |
03-03-2019, 10:47 PM | #4 |
Senior Member
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,516
|
Re: 41 ford radiator mounting?
braces were about 6" long with a carriage bolt, head towards the rad, that slid into slots on the sides of the rad. tighten the nut on the carriage bolt and the other end attached to the inner fender. At least that's how my '41 was set up.
|
03-04-2019, 03:51 AM | #5 |
Member
|
Re: 41 ford radiator mounting?
I have been through the same thing recently. Mine did not have any brackets either but they are available through your parts store. I had to modify mine to fit. They attach to a hole in the inner fender to the side of the radiator
|
03-05-2019, 06:15 PM | #6 |
Senior Member
Join Date: Jun 2010
Location: Indiana
Posts: 338
|
Re: 41 ford radiator mounting?
Sponsored Links (Register now to hide all advertisements)
__________________
"..Nothin' outrun my V8 Ford" (Chuck Berry) S.M.I.B. |
03-06-2019, 12:26 PM | #7 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,919
|
Re: 41 ford radiator mounting?
Easy to make out of flat stock.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|