The Ford Barn

meric42 · 01-20-2019, 06:01 PM

Could somebody post a picture of the top latch handle for a '53 Crestline convertible? I have what appears to be an all original '53 that doesn't seem to have any handle to release the top from the header. All I can see is what appears to be a piece of flat steel that presumeable the handle attaches to? I will try to get a photo of mine soon but the car is in storeage away from home at the moment. Thanks again for the your help

meric42 · 01-21-2019, 08:45 PM

Here is a photo of what I have.

Merc Cruzer · 01-24-2019, 04:36 PM

These are from my 53' Merc. I have to believe it is similar if not the same. Normally these are on e-bay for around $300. If you zoom in you can read the part number. If you want I can send you the originals, just PM me with your e-mail address or send me an e-mail: [email protected].

OK, so mine needed to be cleaned up anyway, so I took it off to give you a few better pictures by its self.

Good luck and be careful, because they are made out of pot metal and break quite easily.

meric42 · 01-24-2019, 07:05 PM

Thanks Roy, Just what I needed

Barners are AWESOME

Merc Cruzer · 01-29-2019, 12:27 PM

Buy a header bar and get the handle free:

https://www.ebay.com/itm/1952-1953-1...O7Tj:rk:1:pf:0

Chris · 01-29-2019, 12:32 PM

Sponsored Links (Register now to hide all advertisements)

I have a 53 Sunliner that had a broken handle. I bought on eon ebay, for around 150.00

meric42 · 01-29-2019, 03:45 PM

Quote:

Originally Posted by Merc Cruzer

Buy a header bar and get the handle free:

https://www.ebay.com/itm/1952-1953-1...O7Tj:rk:1:pf:0

Thanks for the link, i do really appreciate it, but $400 converts to $600 NZ then the freight cost would make this part cost me about $1000 by the time you include New Zealand tax component of 15% of the total cost including freight and I can't really justify that just to get the handle. I think that I can probably make something that will do the job (and look close to the real thing) a lot cheaper given my labour is kinda free

Merc Cruzer · 01-29-2019, 05:42 PM

If you have access to one a 3D printer might be an alternative. I will let you know if I find others.

meric42 · 01-29-2019, 05:49 PM

Quote:

Originally Posted by Merc Cruzer

If you have access to one a 3D printer might be an alternative. I will let you know if I find others.

Thanks

01-24-2019, 07:05 PM	#4
meric42 Senior Member Join Date: Aug 2010 Location: Blenheim, New Zealand Posts: 877	Re: '53 Convertible top latch Thanks Roy, Just what I needed Barners are AWESOME __________________ I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand https://www.fordbarn.com/forum/album.php?albumid=580

01-29-2019, 12:27 PM	#5
Merc Cruzer Senior Member Join Date: Jul 2010 Location: Conifer, Colorado Posts: 2,421	Re: '53 Convertible top latch Buy a header bar and get the handle free: https://www.ebay.com/itm/1952-1953-1...O7Tj:rk:1:pf:0

01-29-2019, 12:32 PM	#6
Chris Senior Member Join Date: May 2010 Location: Spokane, WA Posts: 2,976	Re: '53 Convertible top latch Sponsored Links (Register now to hide all advertisements) I have a 53 Sunliner that had a broken handle. I bought on eon ebay, for around 150.00 __________________ Thee Inland Emperors

01-29-2019, 05:42 PM	#8
Merc Cruzer Senior Member Join Date: Jul 2010 Location: Conifer, Colorado Posts: 2,421	Re: '53 Convertible top latch If you have access to one a 3D printer might be an alternative. I will let you know if I find others.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode