The Ford Barn

BUBBAS IGNITION · 05-02-2019, 01:20 PM

After doing hundreds of the helmet type distributors every now and then we get something a little different etc.
This one has a 11 cast into the housing, its a early three hole core and came off a car direct from a customer. The shaft and weights are marked 40B. Pics below oops......

BUBBAS IGNITION · 05-02-2019, 01:26 PM

pictures.........

35fordtn · 05-02-2019, 03:13 PM

Jim I believe the 11- is nothing more than a casting batch number. I have some NOS. Housings that all have 21- marked the same as the one you photographed

BUBBAS IGNITION · 05-02-2019, 06:33 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by 35fordtn

Jim I believe the 11- is nothing more than a casting batch number. I have some NOS. Housings that all have 21- marked the same as the one you photographed

Yes thats more than likely it , just hadnt ever seen one out of the hundreds we have done???

05-02-2019, 01:20 PM	#1
BUBBAS IGNITION Senior Member Join Date: May 2010 Location: SPEEDWAY INDIANA Posts: 4,148	Different helmet distributor?? After doing hundreds of the helmet type distributors every now and then we get something a little different etc. This one has a 11 cast into the housing, its a early three hole core and came off a car direct from a customer. The shaft and weights are marked 40B. Pics below oops...... __________________ If it Makes Spark, we do it !!!! www.bubbasignition.com [email protected]

05-02-2019, 03:13 PM	#3
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,327	Re: Different helmet distributor?? Jim I believe the 11- is nothing more than a casting batch number. I have some NOS. Housings that all have 21- marked the same as the one you photographed