|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-17-2020, 12:03 PM | #1 |
Senior Member
Join Date: Jan 2015
Posts: 325
|
1938 convertible quarter panel stainless
Will the quarter panel stainless from a 38 convertible coupe (with rumble seat), fit a 38 club convertible coupe, with back seat. the stainless on our 38 convertible coupe is 53''....Thanks
|
01-17-2020, 01:35 PM | #2 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: 1938 convertible quarter panel stainless
The answer is "maybe", as the open car bodies were often outsourced due to the limited production numbers of these models. At one time Drake carried side trim for the '39 convertible coupes and sedans. You can reach them at 800/221-3643.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-19-2020, 09:04 PM | #3 |
Senior Member
Join Date: May 2010
Location: London On, Can.
Posts: 377
|
Re: 1938 convertible quarter panel stainless
Question do you need mlds for a club coupe[has back seat) I have a real good set 53 long ,They came with the club I bought (were off the car ) .they were a slight bit off on the curve to line up to the holes,they had to be forced to line up to the holes I found another set. That fit perfectly. So maybe the ones I still have are to fit the rumble seat coupe and yes maybe there is a slight difference.
|
01-20-2020, 10:46 AM | #4 | |
Senior Member
Join Date: Jan 2015
Posts: 325
|
Re: 1938 convertible quarter panel stainless
Quote:
|
|
01-20-2020, 08:50 PM | #5 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,366
|
Re: 1938 convertible quarter panel stainless
Here is a picture of a 1938 Ford Deluxe Club Convertible showing the rear quarter chrome strip. Does this picture help in answering your question? |
01-21-2020, 08:27 PM | #6 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,366
|
Re: 1938 convertible quarter panel stainless
Sponsored Links (Register now to hide all advertisements)
Wanted - Chrome Strip for rear quarter on unique to Australia 1938 Ford Standard Roadster. It is 53 inches long. My friend is restoring this rare car, but it is missing this strip on the right hand side. The left side strip is on the car. Can anybody help him out with this missing strip? He also needs the die-cast centre strip for the grille. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|