Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-13-2019, 11:16 PM   #1
clo
Member
 
Join Date: Mar 2011
Posts: 91
Default RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Has anybody installed a rts f150 od transmission in a 34 coupe with keeping the torque tube? I need info on this combination. Does anybody make a kit? This combination keeps the shifter location near stock.
clo is offline   Reply With Quote
Old 02-13-2019, 11:38 PM   #2
Ol' Ron
Senior Member
 
Ol' Ron's Avatar
 
Join Date: May 2010
Location: Chester Vt
Posts: 8,840
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

This is a great transmission 3 speed with od. Yes someone does convert these to torque application. However converting to a spicer/Dana 35./44 and you would remove all the problems with the original rear axle. Probably for the same price as the conversion/.
Ol' Ron is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-13-2019, 11:58 PM   #3
clo
Member
 
Join Date: Mar 2011
Posts: 91
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

I would like to keep the original look. I might send the rear end to Hotrod works so they can install there axle swap kit.
clo is offline   Reply With Quote
Old 02-14-2019, 08:27 AM   #4
john in illinois
Senior Member
 
john in illinois's Avatar
 
Join Date: May 2010
Location: Illinois
Posts: 2,181
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

https://fordbarn.com/forum/showthread.php?t=237029

John
john in illinois is offline   Reply With Quote
Old 02-14-2019, 09:03 AM   #5
Ol' Ron
Senior Member
 
Ol' Ron's Avatar
 
Join Date: May 2010
Location: Chester Vt
Posts: 8,840
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Hotrod works is a great outfit. They can also convert the axle to a modern break kit both drum or disk. You can also change to 5 on 4 1/2 bolt pattern for a better selection of Wheels. I did this with the instillation of a Dana 44a rear, this comes with posi and disks and is a very inexpensive up grade compared to the Hotrod unit. I don't have the financial resources to do it any other way. Aesthetics can be expensive.
Ol' Ron is offline   Reply With Quote
Old 02-14-2019, 09:51 AM   #6
flatjack9
Senior Member
 
flatjack9's Avatar
 
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,516
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Sponsored Links (Register now to hide all advertisements)
My friend bought one of the converted transmissions at Hershey last year. It' going in his 39. The torque tube and driveshaft need to be shortened about 2 1/2". The fella was from out east and also did them for Model As.
flatjack9 is offline   Reply With Quote
Old 02-14-2019, 01:47 PM   #7
clo
Member
 
Join Date: Mar 2011
Posts: 91
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Anyone know where I can buy one of these RTS F150 transmission’s?
clo is offline   Reply With Quote
Old 02-14-2019, 04:39 PM   #8
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

There are web sites that can access the salvage yard network. I see them on flea-pay now and then but a lot are for the 6-cylinder applications that have the taller overdrive gears. The few guys that set up conversions for these tend to hoard parts. I've looked for the better overdrive ratio gear for these but they are not easy to find.
rotorwrench is offline   Reply With Quote
Old 02-14-2019, 07:46 PM   #9
36coupe
Senior Member
 
36coupe's Avatar
 
Join Date: Oct 2012
Location: Eastcoast
Posts: 859
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Took me years to find one and I had to settle for the 6 cylinder one. I still need to find the Speedo drive housing, not sure where to look.
36coupe is offline   Reply With Quote
Old 02-14-2019, 08:03 PM   #10
flatjack9
Senior Member
 
flatjack9's Avatar
 
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,516
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

I have had the 6 cylinder version in my car for over 20 years now. I like it.
flatjack9 is offline   Reply With Quote
Old 02-14-2019, 09:41 PM   #11
johndee138
Senior Member
 
johndee138's Avatar
 
Join Date: Jun 2010
Location: Atlanta GA
Posts: 505
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

I did my 36 with a Flathead, T170 RTS 4 speed and a a Columbia with 3.78 R&P
PM me for all the details via a phone call
johndee138 is offline   Reply With Quote
Old 02-15-2019, 11:57 AM   #12
Ol' Ron
Senior Member
 
Ol' Ron's Avatar
 
Join Date: May 2010
Location: Chester Vt
Posts: 8,840
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

I use the steel bell housing for the engine adapter. Bore the register to fit the trans and weld ears on the bell housing. Use stock clutch assy. You can buy a kit to install a modern real axle to the car. Do not install a heavy axle as this can give poor ride quality, a Spicer 35 is light and can handle more than a flathead can put out. This make a nice street riding acr. I was talking to a tire dealer recently, and he said the 15" tire is on the way out and the 16" will continue for quite awhile. Scrap yards are full of Alum wheels and usually go for 15 25 apiece, so a nice set of rims can be had. I use a disk adapter for the front with 5 on 41/2 same as the rear, Modern trans rear axle and decent breaks and wheels . This kind of modification will make the car usable for the next 20 years or more at very little initial investment.
Ol' Ron is offline   Reply With Quote
Old 02-15-2019, 12:05 PM   #13
clo
Member
 
Join Date: Mar 2011
Posts: 91
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Thanks, Ron.
clo is offline   Reply With Quote
Old 02-15-2019, 12:57 PM   #14
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,259
Default Re: RTS F150 OD TRANSMISSION TORQUE Tube IN A 34 COUPE

Quote:
Originally Posted by Ol' Ron View Post
... he said the 15" tire is on the way out and the 16" will continue for quite awhile ...
Boy, I don't know. The little lady's Kia Soul has 15's and you know how many of them are out there. Size selection will probably be a problem though. I do know 13" and 14" tires are extremely hard to find.
tubman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:17 AM.