The Ford Barn

cradlescyth · 08-05-2012, 10:25 AM

I have the # A3344043 This is motor # built in May of 1930
The chassi # is unreadable and all I have is chassi, Is there any way of finding which body went with number.

Thanks for help

Kurt in NJ · 08-05-2012, 11:08 AM

you can narrow the choices somewhat by the leaves in the rear spring possibly

juke joint johnny · 08-05-2012, 11:34 AM

If it still has the rear bumper brackets : the short vertical brackets that attach to the body are different lenths for some body styles ,might give you a clue

John Cochran

Tom Wesenberg · 08-05-2012, 01:32 PM

The frames assembled at the Twin Cities plant had codes on the right rear of the rear crossmember. My 2-23-29 Tudor has T0 for Tudor 10 leaf. My 9-27-28 Phaeton has P8 for Phaeton 8 leaf.

329s · 08-05-2012, 03:21 PM

Sponsored Links (Register now to hide all advertisements)

Other than the above clues...NO...However, if you are very lucky enough to find the original Bill of Sale (factory or dealer) with that number on it...then you will know for sure just what body style went on the chassis.

Pluck

08-05-2012, 10:25 AM	#1
cradlescyth Senior Member Join Date: May 2010 Location: Taunton Ma Posts: 342	Need Model I have the # A3344043 This is motor # built in May of 1930 The chassi # is unreadable and all I have is chassi, Is there any way of finding which body went with number. Thanks for help

08-05-2012, 11:08 AM	#2
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,159	Re: Need Model you can narrow the choices somewhat by the leaves in the rear spring possibly

08-05-2012, 11:34 AM	#3
juke joint johnny Senior Member Join Date: Feb 2012 Location: London England Posts: 908	Re: Need Model If it still has the rear bumper brackets : the short vertical brackets that attach to the body are different lenths for some body styles ,might give you a clue John Cochran

08-05-2012, 01:32 PM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Need Model The frames assembled at the Twin Cities plant had codes on the right rear of the rear crossmember. My 2-23-29 Tudor has T0 for Tudor 10 leaf. My 9-27-28 Phaeton has P8 for Phaeton 8 leaf.

08-05-2012, 03:21 PM	#5
329s Senior Member Join Date: Jan 2012 Location: Walla Walla, WA Posts: 239	Re: Need Model Sponsored Links (Register now to hide all advertisements) Other than the above clues...NO...However, if you are very lucky enough to find the original Bill of Sale (factory or dealer) with that number on it...then you will know for sure just what body style went on the chassis. Pluck