The Ford Barn

fordmerc · 01-22-2011, 01:43 PM

Is it posseble to replace the seal in the front(narrow)end of a torktube with a bearing in the middle,without remove the bearing.???If not,how do i remove it and put it back without destroing it?
Thanks from Rolf in Sweden.

DICK SPADARO · 01-22-2011, 05:51 PM

The seal comes out from the transmission side (narrow end). You must first remove the roller bearing race to remove the seal and then with a long rod it taps right out.

fordmerc · 01-25-2011, 02:29 PM

Sponsored Links (Register now to hide all advertisements)

thanks,it was helpfull

01-22-2011, 01:43 PM	#1
fordmerc Junior Member Join Date: Jun 2010 Posts: 12	-38-39 torktube with midbearing Is it posseble to replace the seal in the front(narrow)end of a torktube with a bearing in the middle,without remove the bearing.???If not,how do i remove it and put it back without destroing it? Thanks from Rolf in Sweden.

01-22-2011, 05:51 PM	#2
DICK SPADARO Senior Member Join Date: May 2010 Location: Altamont, NY Posts: 1,004	Re: -38-39 torktube with midbearing The seal comes out from the transmission side (narrow end). You must first remove the roller bearing race to remove the seal and then with a long rod it taps right out. __________________ dickspadaro.com

01-25-2011, 02:29 PM	#3
fordmerc Junior Member Join Date: Jun 2010 Posts: 12	Re: -38-39 torktube with midbearing Sponsored Links (Register now to hide all advertisements) thanks,it was helpfull