The Ford Barn

28PHAETONROY · 12-26-2018, 02:56 PM

Hi all,
I am working on the top bows for my 28 Phaeton. My question is about the second bow back, the one just behind the driver's head. There is a slight hump or curve in one edge of the wood part on that bow. Most photos I see show the curved part facing up, toward the top material, but I have seen some photos showing the curved part down. Mine is down. While I have the bows apart, I thought I would put it back together correctly.
Anyone have definitive info on this? Photos of a national winner showing the correct orientation?
Thanks,
Roy in Maryland

BRENT in 10-uh-C · 12-26-2018, 03:30 PM

Sponsored Links (Register now to hide all advertisements)

Check your PMs

12-26-2018, 02:56 PM	#1
28PHAETONROY Member Join Date: Apr 2013 Location: Hagerstown, MD Posts: 32	Question about 28 phaeton top bow Hi all, I am working on the top bows for my 28 Phaeton. My question is about the second bow back, the one just behind the driver's head. There is a slight hump or curve in one edge of the wood part on that bow. Most photos I see show the curved part facing up, toward the top material, but I have seen some photos showing the curved part down. Mine is down. While I have the bows apart, I thought I would put it back together correctly. Anyone have definitive info on this? Photos of a national winner showing the correct orientation? Thanks, Roy in Maryland

12-26-2018, 03:30 PM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,504	Re: Question about 28 phaeton top bow Sponsored Links (Register now to hide all advertisements) Check your PMs __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode