Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-15-2021, 11:31 AM   #1
Anteek29
Senior Member
 
Anteek29's Avatar
 
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 984
Default Vacuum Bleeder?

How good are these for bleeding brakes? Thinking of one from Arbor Fright.
__________________
Alan
1929 Special Coupe
1941 Pick-Up
1955 Victoria
Anteek29 is offline   Reply With Quote
Old 06-15-2021, 12:21 PM   #2
51504bat
Senior Member
 
51504bat's Avatar
 
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 2,997
Default Re: Vacuum Bleeder?

Used a Mighty Mite one to bleed the brakes when I converted my Ranch Wagon to disc brakes. Works OK but not as well as a pressure bleeder. If you're doing it your self you need to keep an eye on the M/C level. Don't want to suck it dry.
__________________
Making the simple complicated for over 30 years.
51504bat is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-15-2021, 12:28 PM   #3
Doublepumper
Member
 
Doublepumper's Avatar
 
Join Date: Aug 2017
Location: WA-OR, USA
Posts: 66
Default Re: Vacuum Bleeder?

I use a Mityvac. It has worked well on everything I've used it on. They are very useful for testing vacuum operated components also.
I use it to initially bleed the air out of the system, followed up by doing a pedal push bleed to pressurize the system, remove any air that might still be present, and verify no leakage in any components.
__________________
Ever stop to think and forget to start again?
Doublepumper is offline   Reply With Quote
Old 06-15-2021, 01:06 PM   #4
hotrodart
Senior Member
 
hotrodart's Avatar
 
Join Date: May 2010
Location: Shenandoah Valley Virginia
Posts: 220
Default Re: Vacuum Bleeder?

Ditto on #2 and #3........pretty easy to use, with good results.
hotrodart is offline   Reply With Quote
Old 06-15-2021, 01:21 PM   #5
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,260
Default Re: Vacuum Bleeder?

I had a "Mighty-Vac" years ago and it would not work at all. Looking back, I'll bet it was bad out of the box.

Anyway, the experience really soured me on them.
tubman is offline   Reply With Quote
Old 06-15-2021, 01:31 PM   #6
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 8,935
Default Re: Vacuum Bleeder?

Sponsored Links (Register now to hide all advertisements)
I prefer a pressure bleeder. A good quality system can be found for under $100. Making an adapter is simple.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is offline   Reply With Quote
Old 06-15-2021, 02:40 PM   #7
38bill
Senior Member
 
38bill's Avatar
 
Join Date: Apr 2014
Location: Minnesota
Posts: 1,162
Default Re: Vacuum Bleeder?

I too prefer a pressure bleeder. I have both and no mater what I do the vac bleeder always sucks air around the end of the bleed nipple so it is hard to tell if there is still air in the brake line.
38bill is offline   Reply With Quote
Old 06-16-2021, 01:20 PM   #8
Anteek29
Senior Member
 
Anteek29's Avatar
 
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 984
Default Re: Vacuum Bleeder?

Thanks guys! I forgot about the pressure advantage - finds leaks.
__________________
Alan
1929 Special Coupe
1941 Pick-Up
1955 Victoria
Anteek29 is offline   Reply With Quote
Old 06-16-2021, 06:20 PM   #9
KiWinUS
Senior Member
 
KiWinUS's Avatar
 
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,945
Default Re: Vacuum Bleeder?

I have pressure bled brakes for 47+ years. There are vehicles that you will never get brakes without a pressure bleeder. It is the only way we bleed our race car brakes. I make them out of garden sprayers. We also use a pressure bleeder with a diaphragm for high pressure bleeding fresh systems. Works fantastic fast & a one man job.
KiWinUS is offline   Reply With Quote
Old 06-16-2021, 06:46 PM   #10
russcc
Senior Member
 
Join Date: May 2010
Posts: 2,871
Default Re: Vacuum Bleeder?

I have used both the vac bleeder, and the Motive Products pressure bleeder.The vac seem to do a good job, but the pedal wasn't that great. Then I used a Motive Products bleeder, made my own adapter, (MC cap), and on the 1st pass it blew out a bunch of air still in the system. Good pedal now. Motive Products bleeder is pretty reasonably priced. Been going back a forth with them trying to determine if they have an off the shelve adapter for the 1050, 1051 early Ford MC. Will advise the part # if they do.
russcc is offline   Reply With Quote
Old 06-16-2021, 06:50 PM   #11
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
Default Re: Vacuum Bleeder?

You're better buying speed bleeders....
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote
Old 06-17-2021, 05:56 AM   #12
mike42
Senior Member
 
mike42's Avatar
 
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,599
Default Re: Vacuum Bleeder?

Ant....went through an 8 months process with my '40 brakes and bought 2 of the bleeders which did not work. Bought the Motive unit....made up my own adapter with an extra Master Cyl. cap and bingo....very first time try I had solid brakes. Just buy the pressure tank and make up your own adapter. Motive DOES NOT have one that works.

If you want a photo of my adapter send me your email and I'll show you what I did.

Thx....Mike
mike42 is offline   Reply With Quote
Old 06-17-2021, 06:13 AM   #13
Shoovel
Member
 
Shoovel's Avatar
 
Join Date: Mar 2021
Location: Milton Ontario Canada
Posts: 83
Default Re: Vacuum Bleeder?

What about the old fashioned way? “Hey buddy wanna help me bleed my brakes?” Then he gets a strong leg and you lose a buddy?
Shoovel is offline   Reply With Quote
Old 06-17-2021, 06:29 AM   #14
miniceptor86
Senior Member
 
miniceptor86's Avatar
 
Join Date: Aug 2019
Location: McGregor, IA
Posts: 230
Default Re: Vacuum Bleeder?

I have had good results on my motorcycles and the ‘39 using a piece of small diameter hose snuggly fit over bleeder nipple, the other end immersed in a coffee can of water sitting on the floor. The height difference between the bleeder and the end of the hose creates a small pressure difference that prevents sucking air back into the wheel cylinder.
__________________
Cheers,
Jim&Sandy
McGregor, IA
miniceptor86 is offline   Reply With Quote
Old 06-17-2021, 10:30 AM   #15
deuce_roadster
Senior Member
 
deuce_roadster's Avatar
 
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
Default Re: Vacuum Bleeder?

The HF near me sells Mighty Vac brand. My old aluminum Mighty Vac was all corroded up and I bought a new one and was glad to see it was mostly plastic. Have no problem bleeding brakes with it.
deuce_roadster is offline   Reply With Quote
Old 06-17-2021, 10:52 AM   #16
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,369
Default Re: Vacuum Bleeder?

I still use a vacuum pump but have found that in nearly all cases, I have to wrap the bleeder nipples with teflon tape due to leakage around the thread while the bleeder valve is open. This is the major problem with vacuum bleeding process. Some wheel cylinders have tighter threads than others but they all wear down eventually.

Pressure bleeding is better but is a bit more expensive and a person has to be careful when changing to different types of brake fluid.
rotorwrench is offline   Reply With Quote
Old 06-17-2021, 11:45 AM   #17
38bill
Senior Member
 
38bill's Avatar
 
Join Date: Apr 2014
Location: Minnesota
Posts: 1,162
Default Re: Vacuum Bleeder?

I had several plastic parts on my MityVac disintegrate. Who knew that Dot 3 would attack the plastic parts of a brake bleeder?
38bill is offline   Reply With Quote
Old 06-17-2021, 12:16 PM   #18
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,369
Default Re: Vacuum Bleeder?

I never get brake fluid as far as the vacuum pump. I just plumb in a jar to catch the fluid so that I don't get any in the pump.

The real pita is constantly getting up to check & replenish the master cylinder fluid level. I figure I can use the exercise though plus I don't have to do it very often anyway.
rotorwrench is offline   Reply With Quote
Old 06-18-2021, 01:12 PM   #19
JayChicago
Senior Member
 
JayChicago's Avatar
 
Join Date: Jan 2019
Location: Chicago
Posts: 711
Default Re: Vacuum Bleeder?

I was never able to get a vacuum tool to work for me, on several different cars. I believe due to sucking air at the bleeder nipple, as Rotorwrench described above.
JayChicago is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:54 PM.