30/31 steering brace on 28/29 roadster

[daveymc29]

Has anyone put the later steering brace on a 28/29 roadster? I'm sure it is common on the other cars, but with the thinner dash rail does it hide on the roadsters or not? Sure would like to see a picture of what you have if you have made it work. Or better yet, make another and sell it to me.

Thanks in advance.
Dave Mc Arthur

[Randy in ca]

I'm pretty sure the pictures in this post are of a roadster:

http://fordbarn.com/forum/showpost.p...03&postcount=8

[2manycars]

I installed one in Barry,s coupe. It required a spacer to line up correctly. It worked just fine.

[BILL WILLIAMSON]

Originally Posted by 2manycars

I installed one in Barry,s coupe. It required a spacer to line up correctly. It worked just fine.

2many, you'd have liked this, I once saw a brace, made from just the right size CONNECTING ROD & it wuz CHROMED
Bill W.

[2manycars]

Bill, I have seen that on hot rods. (no pun intended)

[BILL WILLIAMSON]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 2manycars

Bill, I have seen that on hot rods. (no pun intended)

PUNS are fun--My old Bantam Dragster had a home made center steering, mounted on 2 upside down connecting rods. I can still hear the trans, WHIRRING, between my legs
Bill W.

[Y-Blockhead]

Rear Engine Dragster pilots had BIG BALLS to sit in that propinquity of the trans and rear end...

[BILL WILLIAMSON]

Originally Posted by Y-Blockhead

Rear Engine Dragster pilots had BIG BALLS to sit in that propinquity of the trans and rear end...

Friend, Rocky sits that way, except to the LEFT, in his Vintage Dragster, called, "ROCKYS' EVIL TWINS"
Powered by side by side Chevs & hooked together by the flywheel teeth ! Just brush GREASE on the teeth & he's OFF!--MAN DOES THAT THING "SING" A TUNE
Bill W.

[Y-Blockhead]

Here ya go Bill. Poor guys looking down and wondering where his shifter disappeared to...



Sorry for the Non-Model A picture Guys.