The Ford Barn

3twinridges · 12-16-2017, 07:56 PM

Does anyone know if the power valves are available for this carb? It was not in the Daytona kit.

JB

Charlie ny · 12-17-2017, 12:24 PM

3
I've got them......all NOS......
By the way the vac operated plunger which ACTIVATES the power valve
is best left alone unless it is sticking or bent. I have these NOS as well. All that retains these plunger assemblies is the 3 or 4 swage marks. I can guarantee if
you attempt to bead blast the air horn you will befuddle the plunger.
Charlie ny
[email protected]
717 440 8952

3twinridges · 12-17-2017, 01:03 PM

Charlie will contact you on the power valves. I have two fuel pumps I am sending you so we can include them in that transaction. The plunger you mentioned came out easy on disasssembly. It basically fell out, should I stake the hole a little on reassembly to make it a tighter fit?

JB

scicala · 12-17-2017, 01:04 PM

Charlie,

Do you know if the brass power valve in the 847 Holley single barrel is the same style as the one used in the Holley 2140 and 4000 teapot 4 barrel carbs ?

Sal

3twinridges · 12-17-2017, 01:30 PM

It's a size 62 according to the parts book.

Charlie ny · 12-17-2017, 04:03 PM

Sponsored Links (Register now to hide all advertisements)

Sal,
I seem to remember the teapots have a larger diameter head than the
847. The power valve for this carb is exactly like a Stromberg PV only the threads are
finer......Stromberg 5/16- 24.....Holley 5/16-28.
Charlie ny

12-16-2017, 07:56 PM	#1
3twinridges Senior Member Join Date: Dec 2015 Posts: 547	226 Holley 847 power valve Does anyone know if the power valves are available for this carb? It was not in the Daytona kit. JB

12-17-2017, 12:24 PM	#2
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	Re: 226 Holley 847 power valve 3 I've got them......all NOS...... By the way the vac operated plunger which ACTIVATES the power valve is best left alone unless it is sticking or bent. I have these NOS as well. All that retains these plunger assemblies is the 3 or 4 swage marks. I can guarantee if you attempt to bead blast the air horn you will befuddle the plunger. Charlie ny [email protected] 717 440 8952

12-17-2017, 01:03 PM	#3
3twinridges Senior Member Join Date: Dec 2015 Posts: 547	Re: 226 Holley 847 power valve Charlie will contact you on the power valves. I have two fuel pumps I am sending you so we can include them in that transaction. The plunger you mentioned came out easy on disasssembly. It basically fell out, should I stake the hole a little on reassembly to make it a tighter fit? JB

12-17-2017, 01:04 PM	#4
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,705	Re: 226 Holley 847 power valve Charlie, Do you know if the brass power valve in the 847 Holley single barrel is the same style as the one used in the Holley 2140 and 4000 teapot 4 barrel carbs ? Sal

12-17-2017, 01:30 PM	#5
3twinridges Senior Member Join Date: Dec 2015 Posts: 547	Re: 226 Holley 847 power valve It's a size 62 according to the parts book.

12-17-2017, 04:03 PM	#6
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	Re: 226 Holley 847 power valve Sponsored Links (Register now to hide all advertisements) Sal, I seem to remember the teapots have a larger diameter head than the 847. The power valve for this carb is exactly like a Stromberg PV only the threads are finer......Stromberg 5/16- 24.....Holley 5/16-28. Charlie ny