The Ford Barn

luvmyclassics · 10-26-2014, 08:35 AM

Who sells a 3 x 2 fuel line for Holley carbs?

JSeery · 10-26-2014, 08:56 AM

Not use what the question is referring to, fuel line is fuel line in general. A lot of setups use a fuel block with an inlet and three outlets, with a line to each carb. Are you looking for metal lines or hoses? Are you referring to the inlet fitting or the line itself?

AnthonyG · 10-26-2014, 09:05 AM

Sponsored Links (Register now to hide all advertisements)

Speedway, Jegs, Summit, JC Whitney and more all have the chromed fuel blocks for 3x2, 2x2 and more, for yours 1 in 3 out fitted with female pipe threads for nozzles. As far as the lines themselves go you have a choice of materials to go with from almost any automotive supplier as well, easiest obviously is rubber fuel line, then, copper formed, aluminum formed, or SS formed, the latter three will require a bending tool not to kink and a flaring tool for the fitting ends.

10-26-2014, 08:35 AM	#1
luvmyclassics Senior Member Join Date: Jan 2011 Location: The Villages, FL Posts: 193	3 x 2 fuel line Who sells a 3 x 2 fuel line for Holley carbs?

10-26-2014, 08:56 AM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: 3 x 2 fuel line Not use what the question is referring to, fuel line is fuel line in general. A lot of setups use a fuel block with an inlet and three outlets, with a line to each carb. Are you looking for metal lines or hoses? Are you referring to the inlet fitting or the line itself?

10-26-2014, 09:05 AM	#3
AnthonyG Senior Member Join Date: May 2013 Location: Pa. Posts: 2,171	Re: 3 x 2 fuel line Sponsored Links (Register now to hide all advertisements) Speedway, Jegs, Summit, JC Whitney and more all have the chromed fuel blocks for 3x2, 2x2 and more, for yours 1 in 3 out fitted with female pipe threads for nozzles. As far as the lines themselves go you have a choice of materials to go with from almost any automotive supplier as well, easiest obviously is rubber fuel line, then, copper formed, aluminum formed, or SS formed, the latter three will require a bending tool not to kink and a flaring tool for the fitting ends. __________________ Nomad