|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-01-2022, 11:07 AM | #1 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,177
|
Fuel pump inlet/outlet port question: 18 degrees?
Question:
Does anyone know what degree the seats are for the inlet/outlet ports of a fuel pump? I'm planning on running flexible fuel hose until the car is sorted out. I noticed that Stromberg sells fittings that have a 18 degree seat for the carb inlets. I'd assume the fuel pump fittings are the same. Thought it would be best to use one with a machined seat vs. one with just a threaded nipple. Does it matter on the fuel pump? |
03-02-2022, 09:39 AM | #2 |
Senior Member
Join Date: Jul 2016
Location: Missouri
Posts: 424
|
Re: Fuel pump inlet/outlet port question: 18 degrees?
Tim..not sure what fuel pump, but: on my Flathead fuel pump with 1/2-20 that take the ford fittings , I ordered two taper fittings from Speedway for 5/16 flex fuel line. They worked fine. The part number is 91611064. I don't know what the taper is.
Part # 91611064 |
Sponsored Links (Register now to hide all advertisements) |
|
03-02-2022, 10:02 AM | #3 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,177
|
Re: Fuel pump inlet/outlet port question: 18 degrees?
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|