The Ford Barn

dlfrisch · 03-27-2021, 10:29 AM

What position does the rod spider have to be in ? I can’t get the switch/horn to work properly. When assembled it clicks hard trying to turn the switch, if at all and some times the horn blowes.

Brentwood Bob · 03-27-2021, 11:21 AM

https://www.fordbarn.com/forum/showt...h+installation

alexiskai · 03-27-2021, 11:30 AM

Sponsored Links (Register now to hide all advertisements)

One time a similar thing happened to me, and as I recall I’d put the retaining clip in slightly wrong. The spider should be oriented vertically when no lights are on.

03-27-2021, 10:29 AM	#1
dlfrisch Senior Member Join Date: Feb 2014 Location: Florida - 32128 Posts: 416	Lighting switch installation What position does the rod spider have to be in ? I can’t get the switch/horn to work properly. When assembled it clicks hard trying to turn the switch, if at all and some times the horn blowes.

03-27-2021, 11:21 AM	#2
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,233	Re: Lighting switch installation https://www.fordbarn.com/forum/showt...h+installation

03-27-2021, 11:30 AM	#3
alexiskai Senior Member Join Date: Apr 2018 Location: Mebane NC Posts: 2,350	Re: Lighting switch installation Sponsored Links (Register now to hide all advertisements) One time a similar thing happened to me, and as I recall I’d put the retaining clip in slightly wrong. The spider should be oriented vertically when no lights are on.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode