12-11-2018, 01:23 PM | #1 |
Senior Member
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
|
Head Gasket
Is the FelPro 7013 gasket any good? I found a few in my basement going through some parts boxes. This would be used say on a .040 / .060 overbore.
|
12-11-2018, 01:30 PM | #2 |
Senior Member
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
|
Re: Head Gasket
Forgot to mention. This is a plain steel clad gasket with a white looking core material ( Asbestos?).
|
Sponsored Links (Register now to hide all advertisements) |
|
12-11-2018, 01:37 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 2,597
|
Re: Head Gasket
Brian,
Try this: http://www.fordgarage.com/pages/ABcy...asketguide.htm AND http://www.fordgarage.com/pages/felproAheadgasket.htm There might be more ... I just did a quick scan ... Vince Falter has a wealth of info here. Last edited by Benson; 12-11-2018 at 01:57 PM. |
12-11-2018, 05:39 PM | #4 |
Senior Member
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
|
Re: Head Gasket
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|