The Ford Barn

rockfla · 11-15-2019, 08:00 AM

I "think" I have a customer who can bend me up some materials to make these seat brackets......35 Sedan Delivery.....not sure IF they were used other places BUT "IF" any barner's want a set let me know and will figure them in my material order. PM me.

V8COOPMAN · 11-15-2019, 10:17 AM

Those should be pretty simple to fabricate on the workbench. The biggest consideration when laying it out is the curve. Nice of you to offer, though. DD

11-15-2019, 10:17 AM	#2
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 5,392	Re: Any need Those should be pretty simple to fabricate on the workbench. The biggest consideration when laying it out is the curve. Nice of you to offer, though. DD __________________ *T5 W/TORQUE TUBE* *I may not be the BEST, but I'll do 'til he gets here!*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode