Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-05-2017, 02:55 AM   #1
Ian NZ
Senior Member
 
Ian NZ's Avatar
 
Join Date: May 2010
Location: Taranaki, New Zealand
Posts: 795
Default Model A Horn armature.

I thought I might have a have a Sparton Model A horn rewound but the armature has a loose segment on it can that be repaired and rewound or am I better to try and locate another one. Does anyone know anything about these A & L Parts Specialties 6 volt horn motors, can they be fitted to the original Sparton horns.
Ian NZ is offline   Reply With Quote
Old 10-05-2017, 01:08 PM   #2
Jon-Ohio
Senior Member
 
Join Date: May 2010
Posts: 183
Default Re: Model A Horn armature.

Yes they do fit original front horn projector bells - and are stamped either Sparton or Stewart Warner - powder coated black. Hopes this helps.

A & L email:
anlel@aol.com

USA phone # - M-Th 8 to 5 ET and Fri 8-12pm ET
860-693-0112 or 860-693-2620
Jon-Ohio is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-05-2017, 07:18 PM   #3
JohnLaVoy
Senior Member
 
JohnLaVoy's Avatar
 
Join Date: Jun 2014
Location: Rocklin, CA
Posts: 779
Default Re: Model A Horn armature.

The A&L unit is a great fix for your horn. Their products are really top notch.
JohnLaVoy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:22 AM.