Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-13-2019, 06:58 PM   #1
30-9
Senior Member
 
Join Date: Aug 2014
Location: MA
Posts: 783
Default 39 radio antenna

Hi Gents

I have a stock antenna (on the roof) on my 39. I want to remove just the rod and leave the base, on the roof. I removed the (what I think is) set screw. However the rod will not pull out.

What’s the trick. I see no other screws. There is a spot on opposite side where another set screw may have been but it appears to be missing.
__________________
Thanks - 30-9
1939, 1940
30-9 is offline   Reply With Quote
Old 09-14-2019, 09:58 AM   #2
marko39
Senior Member
 
Join Date: Oct 2016
Location: harpursville ny
Posts: 255
Default Re: 39 radio antenna

It should come out with the set screws removed, probably held in by corrosion.
marko39 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-14-2019, 10:07 AM   #3
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 4,793
Default Re: 39 radio antenna

I am pretty sure that the wire is clipped to the shaft in the middle
Kurt in NJ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:58 AM.