Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-16-2019, 05:11 PM   #1
Killerbee
Member
 
Killerbee's Avatar
 
Join Date: Mar 2014
Location: South jersey
Posts: 40
Default Snyder’s 6:1 head

Is anyone running a Snyder’s 6:1 head? I recently put one on my 30A and have had nothing but problems. I’m on my 3rd head gasket and the car runs rough as hell. I’m not new at putting head gaskets on and never has this many issues.I’ve warmed up cooled down and retorqued 3 times before driving. My timing is set correctly and I even retarted the timing a little to avoid pre ignition. It idles fine revs fine but when I drive it feels like bricks in a drier. The engine is healthy and never had any issues with the stock head. I one step away from putting the OEM head back on. I really hope I didn’t hurt my engine with this head.
Killerbee is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:45 PM.