Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-11-2018, 01:23 PM   #1
Brian in Wheeling
Senior Member
 
Brian in Wheeling's Avatar
 
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
Default Head Gasket

Is the FelPro 7013 gasket any good? I found a few in my basement going through some parts boxes. This would be used say on a .040 / .060 overbore.
Brian in Wheeling is offline   Reply With Quote
Old 12-11-2018, 01:30 PM   #2
Brian in Wheeling
Senior Member
 
Brian in Wheeling's Avatar
 
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
Default Re: Head Gasket

Forgot to mention. This is a plain steel clad gasket with a white looking core material ( Asbestos?).
Brian in Wheeling is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-11-2018, 01:37 PM   #3
Benson
Senior Member
 
Join Date: May 2010
Posts: 2,579
Default Re: Head Gasket

Brian,

Try this:
http://www.fordgarage.com/pages/ABcy...asketguide.htm

AND

http://www.fordgarage.com/pages/felproAheadgasket.htm

There might be more ... I just did a quick scan ... Vince Falter has a wealth of info here.

Last edited by Benson; 12-11-2018 at 01:57 PM.
Benson is offline   Reply With Quote
Old 12-11-2018, 05:39 PM   #4
Brian in Wheeling
Senior Member
 
Brian in Wheeling's Avatar
 
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
Default Re: Head Gasket

Sponsored Links (Register now to hide all advertisements)
O.K. looks like I have the unmarked, early version with the thicker cyl. spacing...nice!
Brian in Wheeling is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:24 AM.