The Ford Barn

rer_239 · 12-12-2018, 03:10 PM

Is there a spacer that goes on the front end of the crankshaft before the pulley?
Thanks
Dick

Bob C · 12-12-2018, 03:14 PM

There's a slinger.

rer_239 · 12-12-2018, 03:22 PM

I have the slinger but is there a spacer about an inch long ?
Thanks
Dick

Bob C · 12-12-2018, 03:31 PM

If you have a two piece crank pulley there is.

rer_239 · 12-12-2018, 03:47 PM

that's what i have
thanks
dick

rer_239 · 12-12-2018, 08:39 PM

Sponsored Links (Register now to hide all advertisements)

Is the spacer availabile separately? The one I have has a lot of play where it meshes w/ the pulley.
Thanks
Dick

redmodelt · 12-12-2018, 09:18 PM

The two piece pulley is after market so finding one that matches your slots would be a pot shot.

This is a couple of years old but should still be good information;
https://www.fordbarn.com/forum/showthread.php?t=170319

Dean Lemoine · 12-14-2018, 07:01 AM

I'm new to this, what's a slinger?

Bruce of MN · 12-14-2018, 07:33 AM

Quote:

Originally Posted by Dean Lemoine

I'm new to this, what's a slinger?

https://www.brattons.com/oil-slinger.html

BILL WILLIAMSON · 12-14-2018, 08:39 AM

Some supplier sells a 2 piece pulley that screws together with a L/H thread. Looks a stock pulley. I forgot where I bought it. Minerva was happy with hers!
Bill W.

BillLee/Chandler, TX · 12-14-2018, 09:21 AM

Quote:

Originally Posted by Bruce of MN

https://www.brattons.com/oil-slinger.html

What will be the results if you put the slinger on backwards?

BILL WILLIAMSON · 12-14-2018, 09:26 AM

Quote:

Originally Posted by BillLee/Chandler, TX

What will be the results if you put the slinger on backwards?

What if you put your wheel backwards??
Bill W.

30 Closed Cab PU · 12-14-2018, 11:45 AM

Quote:

Originally Posted by BILL WILLIAMSON

What if you put your wheel backwards??
Bill W.

Frequently you are hilarious

. Hopefully this is one of those times, and I do not misunderstand.

Glad you are back Bill, missed your unique style. Hope you can get back to signing off your posts with humor, with modified Billxxxxx.

12-12-2018, 03:10 PM	#1
rer_239 Senior Member Join Date: May 2010 Location: muskegon, mi Posts: 294	Engine pulley Is there a spacer that goes on the front end of the crankshaft before the pulley? Thanks Dick

12-12-2018, 03:14 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,741	Re: Engine pulley There's a slinger.

12-12-2018, 03:22 PM	#3
rer_239 Senior Member Join Date: May 2010 Location: muskegon, mi Posts: 294	Re: Engine pulley I have the slinger but is there a spacer about an inch long ? Thanks Dick

12-12-2018, 03:47 PM	#5
rer_239 Senior Member Join Date: May 2010 Location: muskegon, mi Posts: 294	Re: Engine pulley that's what i have thanks dick

12-12-2018, 08:39 PM	#6
rer_239 Senior Member Join Date: May 2010 Location: muskegon, mi Posts: 294	Re: Engine pulley Sponsored Links (Register now to hide all advertisements) Is the spacer availabile separately? The one I have has a lot of play where it meshes w/ the pulley. Thanks Dick

12-12-2018, 09:18 PM	#7
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Engine pulley The two piece pulley is after market so finding one that matches your slots would be a pot shot. This is a couple of years old but should still be good information; https://www.fordbarn.com/forum/showthread.php?t=170319 __________________ I know the voices aren't real but damn they have some good ideas!

12-14-2018, 07:01 AM	#8
Dean Lemoine Senior Member Join Date: Nov 2018 Location: Dahlonega, Ga Posts: 251	Re: Engine pulley I'm new to this, what's a slinger?

12-14-2018, 08:39 AM	#10
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Engine pulley Some supplier sells a 2 piece pulley that screws together with a L/H thread. Looks a stock pulley. I forgot where I bought it. Minerva was happy with hers! Bill W. __________________ "THE ASSISTANT GURU OF STUFF"