|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-13-2014, 04:48 PM | #1 |
Junior Member
Join Date: Sep 2010
Location: Wisconsin
Posts: 25
|
Metal trim piece
I am installing the interior on my 1929 Tudor sedan and the instructions say to put the front windlace under a "metal finish strip" which is fastened to the front body pillar by rivets. Does anyone know what this piece is called and would you have any? 2 are needed, one for each side. Thanks, Bob.
|
01-13-2014, 07:40 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Metal trim piece
I don't know if it's reproduced, but you might try Bert's in Denver for a pair of original trim strips. I guess they might be called windlace retainers.
Bert's 800-321-1931 |
Sponsored Links (Register now to hide all advertisements) |
|
01-13-2014, 08:22 PM | #3 |
Senior Member
Join Date: Dec 2012
Location: HOLDEN, MAINE
Posts: 133
|
Re: Metal trim piece
MAC'S shows the windlace retainers holds windlace in vertical position along the cowl pillar. part # A46128 @ 18.95/ea.
__________________
MY PROBLEM CHILD! |
01-13-2014, 08:56 PM | #4 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Metal trim piece
As stated above the 2 peices are refered to as A-45363 Retainer (Coupe pillar windlace)...there should be plenty of these strips around as they fit more than 1 body style.
Also, is there a thin strip of cardboard on the Windlace Assembly? If not there should be as this helps in the placement of both the retainer and the windlace. Pluck |
01-13-2014, 09:56 PM | #5 |
Junior Member
Join Date: Sep 2010
Location: Wisconsin
Posts: 25
|
Re: Metal trim piece
Thank you all for your input. I browsed the catalog but couldn't seem to find them without your help! Thanks, Bob.
|
09-02-2017, 03:56 PM | #6 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
Re: Metal trim piece
Sponsored Links (Register now to hide all advertisements)
|
09-03-2017, 07:31 AM | #7 |
Senior Member
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
|
Re: Metal trim piece
When I first did my 29 coupe I used the aluminum strip from the repro aluminum rain gutter, I bent it and cut it to fit.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|