|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-26-2019, 07:54 AM | #1 |
Member
Join Date: Dec 2010
Location: Wisconsin
Posts: 30
|
51 Mercury Flathead and T5 setup complete
City:
eau claire
State:
wi
Price:
3000
Here is a complete 51 Mercury flathead , borg beck clutch setup and a T5 transmission.
This is a running 51 mercury flathead pulled from a restored 52 mercury (in favor of a small Block) I have videos of the engine running. Pan timing cover and rear main seals replaced . I wide belt system has been installed , along with new water pumps and belts. New old stock fan bearing setup installed as well. The clutch and adapter : flywheel turned , new ring gear installed . All clutch components are new . Flywheel pressure plate throwout and pilot bearings . Nos clutch rod and pin Adapter is speedway , throwout return spring installed. All have been assembled and tested. T5 is from an s10 , non world class with geared speedometer. Solid , All has been inspected and new seals installed . I sold the 32 coupe this was going in, now this has to go. 3500.00 try to find , source parts and a fit this setup. this is what it cost me , and the labor was free. Please contact me with questions , yes I am negotiable . I prefer not to split. Try to gather assemble and do this for my asking price . I will ship world wide Mike 715-Five 86-zero267 Last edited by rcnut223; 06-01-2019 at 09:27 AM. |
05-26-2019, 08:23 AM | #2 |
Member
Join Date: Dec 2010
Location: Wisconsin
Posts: 30
|
Re: 51 Mercury Flathead and T5 setup complete
here are some pictures
|
Sponsored Links (Register now to hide all advertisements) |
|
06-01-2019, 09:27 AM | #3 |
Member
Join Date: Dec 2010
Location: Wisconsin
Posts: 30
|
Re: 51 Mercury Flathead and T5 setup complete
Sponsored Links (Register now to hide all advertisements)
Obo |
|
|
Sponsored Links (Register now to hide all advertisements) |
|