KR Wilson axle stand specs questions

[V8COOPMAN]

Originally Posted by rich b

Makes sense; the stand could serve as disassembly station before repairs to the axle and a reassembly stand after the banjo was repaired. Guess. if you had a way to handle the complete unit, it could be built out with the spring and all and at a convenient working height.

I can open-mindedly go along with all of that. DD

[Flathead Youngin']

I think it's useful. It says it right there!

[rich b]

^^^ Interesting add; had never thought of using it for front axles; probably would work better than the bench vise I usually use.

[Flathead Youngin']

Hmmmm, I did a snippet, it should have been larger than that....is it small on your end even when you click on it?

[Flathead Youngin']

I guess for just handling the banjo while pulling/replacing....

See if this one is larger...it is when I open it from my desktop...

I hope this isn't a hijack!