|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-12-2015, 12:34 PM | #21 |
Senior Member
Join Date: May 2010
Location: Ft Mohave,Az
Posts: 1,987
|
Re: one step forward & two back
Just have to give a big THANKS to larry/Texas for reminding me of the idea about the guides his dad used. I bought 2 5/16 six inch long bolts that were threaded all the way & cut the heads off then cut them in 1/2 & screwed them into the block (2 on each side) I had forgotten about that trick. They worked fantastic as guides & I was able to get a couple of nuts on to help hold the pan in place. Thanks again Larry, much appreciated.
Boy when you get to this stage in life you need ,at least I do, all the reminders you can get. |
02-12-2015, 02:24 PM | #22 |
Senior Member
Join Date: Jun 2010
Location: Palatine, Il
Posts: 486
|
Re: one step forward & two back
Another tool is, ratchet hold straps.
__________________
1939 Fordor Deluxe 1939 Ford Coupe Std 1940 Ford pickup Nothing in life is to be feared; it is only to be understood. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|