05-12-2010, 11:09 AM | #1 |
Junior Member
Join Date: May 2010
Posts: 1
|
Band Ears
I can not get the band ears on after putting the band in. I started the band on the right side. I have seen two different styles of band ears. Some bands have a round rivet type stud to attach the band ears to.
My bands have two long metal tangs on the bands and the ears have long slots in them that go over the long tangs. Once the band is around the drum I can not get enough band on the left side to attach the ears. I have some of the other bands but do not have any ears for them. I have only removed the brake and low speed band. Would I need to remove the reverse band to get these ears on?? |
05-12-2010, 12:50 PM | #2 |
Member
Join Date: May 2010
Posts: 29
|
Re: Band Ears
I had the same problem when I tried usign those and had to pull the hogs head to get them on. The one's with the round rivet you can get on but because you already have your bands riveted to these I would just pull the hogs head and put them on that way.
Removing the reverse band won't help you get the ear on. |
Sponsored Links (Register now to hide all advertisements) |
|
05-12-2010, 04:26 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,961
|
Re: Band Ears
Could you post a photo of the cause of interference? those bands were made to work so maybe we could see what is going on.
|
05-12-2010, 08:54 PM | #4 |
Senior Member
Join Date: May 2010
Location: Vici,Okla.
Posts: 256
|
Re: Band Ears
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|