The Ford Barn

Mikeinnj · 12-14-2015, 02:14 PM

Have any Fordbarn members received their GAV Deep Sockets yet ???

Chris Haynes · 12-14-2015, 02:31 PM

What is a GAV deep socket used for?

Mitch//pa · 12-14-2015, 02:44 PM

Quote:

Originally Posted by Chris Haynes

What is a GAV deep socket used for?

It's a deep socket for the GAV

Anteek29 · 12-14-2015, 02:53 PM

Nope...still waiting.

Rowdy · 12-14-2015, 03:11 PM

Another Fordbarn Fleecing? Rod

CarlG · 12-14-2015, 03:44 PM

Sponsored Links (Register now to hide all advertisements)

I wouldn't go that far, Rod, no one has shelled out any money at this point -- except the guy making the sockets.

Mike V. Florida · 12-14-2015, 06:08 PM

Quote:

Originally Posted by Rowdy

Another Fordbarn Fleecing? Rod

No way. He put out all the time and money asking for nothing in advance but time.

Y-Blockhead · 12-14-2015, 08:49 PM

Quote:

Originally Posted by Mike V. Florida

No way. He put out all the time and money asking for nothing in advance but time.

Mike's right. Bill has asked for nothing up front but for us to be patient.

tbirdtbird · 12-14-2015, 08:58 PM

I am not known for mincing words. A totally uncalled for comment Rod you should delete it

CarlG · 12-14-2015, 10:25 PM

Quote:

Originally Posted by tbirdtbird

i am not known for mincing words. A totally uncalled for comment rod you should delete it

a m e n !

Manager · 12-14-2015, 11:01 PM

He didn't make a comment, he asked a question. There is a question mark if you look.He probably hasn't read the 12 page thread about the grand production of a socket.

Ray in La Mesa · 12-15-2015, 08:45 AM

Still patiently waiting.

fingers · 12-15-2015, 09:42 AM

Yes There are 7 members of the Sullivan trail Model A Ford club in or around Horseheads, New York that have gotten theirs. Fellows I am the father of Bill Haag who has made the sockets. So since I am the Pop I pulled rank and got the first 8 sockets off the production line. I also was with my son in his shop a few weeks ago helping with heat treatment and hardening the sockets. My kid kept me up till 2 AM getting this done. Bill has been busy with his own business and getting healthy. Too bad that I live over 200 miles from him or I could maybe get some more ready to ship. I think the first orders should be ready soon. Thanks for your patience. Bill Haag, Sr.

tbirdtbird · 12-15-2015, 11:13 AM

Bill,
we appreciate the hard work and long hours that it takes to make something like this happen. We are lucky to have a talented father-son team such as yours doing this.

When they are ready they are ready, and in the meantime the interested members here will be just fine.

Russ/40 · 12-15-2015, 11:30 AM

I missed something. How can I get one?

fingers · 12-15-2015, 01:24 PM

Quote:

Originally Posted by Rowdy

Another Fordbarn Fleecing? Rod

Rod: I am so sorry that your first thought about these sockets is that it was a fleecing. I have sent you an e-mail with all my contact info. Please read it and get back to me, and allow me to put your mind at ease. Sincerely, Bill Haag, Sr

TinCup · 12-15-2015, 02:08 PM

I had hoped to give mine to the carb guy in the club for helping everyone out with their carb problems. I am still looking forward to getting this.

Mike V. Florida · 12-15-2015, 03:19 PM

Quote:

Originally Posted by fingers

Yes There are 7 members of the Sullivan trail Model A Ford club in or around Horseheads, New York that have gotten theirs. Fellows I am the father of Bill Haag who has made the sockets. So since I am the Pop I pulled rank and got the first 8 sockets off the production line. I also was with my son in his shop a few weeks ago helping with heat treatment and hardening the sockets. My kid kept me up till 2 AM getting this done. Bill has been busy with his own business and getting healthy. Too bad that I live over 200 miles from him or I could maybe get some more ready to ship. I think the first orders should be ready soon. Thanks for your patience. Bill Haag, Sr.

Good things come to those who wait!

Chris Haynes · 12-15-2015, 03:47 PM

Quote:

Originally Posted by Mitch//pa

It's a deep socket for the GAV

I don't know what a GAV is.

Mitch//pa · 12-15-2015, 04:22 PM

Quote:

Originally Posted by Chris Haynes

I don't know what a GAV is.

It's a specially made socket to remove the GAV assy easily from a zenith carburetor.
Below is a picture of the GAV (gas adjusting valve)
As ""Ward"" mentioned the choke Rod attaches to the GAV and protrudes into the r/s of the passenger compartment. Pull on the Rod to use the choke or turn it in either direction to adjust the fuel mixture at cruising speed. Clockwise leans it out,,, counter clockwise richness it..

12-14-2015, 02:14 PM	#1
Mikeinnj Senior Member Join Date: May 2010 Location: Northern New Jersey Posts: 1,262	Anyone received their GAV Deep Socket Have any Fordbarn members received their GAV Deep Sockets yet ???

12-14-2015, 02:31 PM	#2
Chris Haynes Senior Member Join Date: May 2010 Location: Camarillo, CA and Pine Grove, CA Posts: 2,832	Re: Anyone received their GAV Deep Socket What is a GAV deep socket used for? __________________ 1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go?

12-14-2015, 02:53 PM	#4
Anteek29 Senior Member Join Date: Dec 2014 Location: Santa Maria, CA Posts: 985	Re: Anyone received their GAV Deep Socket Nope...still waiting. __________________ Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria

12-14-2015, 03:11 PM	#5
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Anyone received their GAV Deep Socket Another Fordbarn Fleecing? Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

12-14-2015, 03:44 PM	#6
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,115	Re: Anyone received their GAV Deep Socket Sponsored Links (Register now to hide all advertisements) I wouldn't go that far, Rod, no one has shelled out any money at this point -- except the guy making the sockets. __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club

12-14-2015, 08:58 PM	#9
tbirdtbird BANNED Join Date: May 2012 Location: inside your RAM Posts: 3,134	Re: Anyone received their GAV Deep Socket I am not known for mincing words. A totally uncalled for comment Rod you should delete it __________________ '31 180A

12-14-2015, 11:01 PM	#11
Manager Senior Member Join Date: Jan 2015 Location: Birkdale, Qld,Aust Posts: 170	Re: Anyone received their GAV Deep Socket He didn't make a comment, he asked a question. There is a question mark if you look.He probably hasn't read the 12 page thread about the grand production of a socket. Last edited by Manager; 12-14-2015 at 11:08 PM.

12-15-2015, 08:45 AM	#12
Ray in La Mesa Senior Member Join Date: May 2010 Location: La Mesa Ca Posts: 1,166	Re: Anyone received their GAV Deep Socket Still patiently waiting.

12-15-2015, 09:42 AM	#13
fingers Member Join Date: May 2010 Location: Horseheads, NY Posts: 39	Re: Anyone received their GAV Deep Socket Yes There are 7 members of the Sullivan trail Model A Ford club in or around Horseheads, New York that have gotten theirs. Fellows I am the father of Bill Haag who has made the sockets. So since I am the Pop I pulled rank and got the first 8 sockets off the production line. I also was with my son in his shop a few weeks ago helping with heat treatment and hardening the sockets. My kid kept me up till 2 AM getting this done. Bill has been busy with his own business and getting healthy. Too bad that I live over 200 miles from him or I could maybe get some more ready to ship. I think the first orders should be ready soon. Thanks for your patience. Bill Haag, Sr.

12-15-2015, 11:13 AM	#14
tbirdtbird BANNED Join Date: May 2012 Location: inside your RAM Posts: 3,134	Re: Anyone received their GAV Deep Socket Bill, we appreciate the hard work and long hours that it takes to make something like this happen. We are lucky to have a talented father-son team such as yours doing this. When they are ready they are ready, and in the meantime the interested members here will be just fine. __________________ '31 180A

12-15-2015, 11:30 AM	#15
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Anyone received their GAV Deep Socket I missed something. How can I get one?

12-15-2015, 02:08 PM	#17
TinCup Senior Member Join Date: May 2010 Location: OKC / Tonkawa, Ok. Posts: 1,977	Re: Anyone received their GAV Deep Socket I had hoped to give mine to the carb guy in the club for helping everyone out with their carb problems. I am still looking forward to getting this. __________________ Oklahoma City Model A Restorers Group.