Flywheel/pressure plate combo on '50 Merc block

[rotorwrench]

Thanks a lot Bob. I can put a visual on what Center Force has now and those match the numbers they call out. With the pressure it takes to push the B&B clutch on the old Merc I figure even the CF365222 will probably be near the same. I'll have to try one in one of my old Mercs in the future.

Kerby

[REAL32]

WILCAP sells newly built 50 Merc style pressure plates.
Their number is (805) 481-7639 or [email protected], put "Wilcap" in the subject line.
Their website is http://www.wilcap.com/