Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-11-2019, 07:34 PM   #1
daren007
Senior Member
 
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 745
Default Tillotson X

Sponsored Links (Register now to hide all advertisements)
I have a Tillotson X I do not know it's history. The carb is clean as well as the passages. The manifold flange is flat and so is the bowl lower body. The upper body has a slight warp however I appears to seal when attached to the lower half. I can start the engine cold however I have to tickle the choke until warm up. Once warm she idles really well and I get results from the idle mixture screw. The problem I am having is I cannot get results from the main GAV adjustment. Closed or open nothing changes. Main jets are open.The engine will accelerate and run fine at higher speeds. (engine is on a stand). The float is set at 1". Help.
daren007 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:18 AM.