The Ford Barn

JBD · 11-01-2012, 09:32 AM

About finished with my Victoria and have some left over parts:

Cowl lamps-orginal and it nice shape. No dents - 75.00 -SOLD

Left front fender - no wheel well, no bead break - 225.00 - SOLD

Passenger side front fender - good shape - no wheel well- 200.00

Rear tire mount - 25.00 - SOLD

Front bumper brackets - 25.00 SOLD

Victoria (under front seat) floor pan, one rust hole - 155.00 - SOLD

Side and rear window curtains with tassels-believe they are NOS- SOLD

Splash apron filler for converting an early 30 fender to late 30/31 fender-passenger side - 35.00

[email protected] or 903 343 9378

JBD · 11-19-2012, 07:12 AM

Bump

JBD · 11-23-2012, 05:39 AM

I also have the rear seat wood, seat base and back support. They are excellent oak and almost perfect. Both for 150.00 plus shipping. Can send pics.

31victoria · 11-23-2012, 04:24 PM

Is this wood only no springs?

Falcon · 11-23-2012, 08:38 PM

Would appreciate some pictures - email to [email protected]

Thanks

JBD · 02-17-2013, 10:24 AM

Sponsored Links (Register now to hide all advertisements)

Been on the road so sorry for the late response. My pics are too large to upload on the Barn. Send me an email and I well send via email. [email protected]

JBD · 02-17-2013, 06:35 PM

no springs but do have the male and female latch that hold the back rest up

JBD · 02-19-2013, 09:45 PM

i got an email from the address below about the rear seat latch and the email address is not valid. if you are still interested email again. thanks, jim

mailto:[email protected]

Tiny · 02-19-2013, 09:59 PM

Do you have any extra plates that the back of the front seats rest on?

aandtman · 02-21-2013, 06:40 AM

I will have one if I don't sell it at San Diego. PM me at [email protected] as a reminder.
$25.00 includes shipping in USA.

JBD · 02-21-2013, 07:35 AM

I don't have the seat mount plates. All parts sold except passenger front fender. Thanks, Jim

11-01-2012, 09:32 AM	#1
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	1931 Model A Victoria Parts City: Arp State: Texas Price: see ad About finished with my Victoria and have some left over parts: Cowl lamps-orginal and it nice shape. No dents - 75.00 -SOLD Left front fender - no wheel well, no bead break - 225.00 - SOLD Passenger side front fender - good shape - no wheel well- 200.00 Rear tire mount - 25.00 - SOLD Front bumper brackets - 25.00 SOLD Victoria (under front seat) floor pan, one rust hole - 155.00 - SOLD Side and rear window curtains with tassels-believe they are NOS- SOLD Splash apron filler for converting an early 30 fender to late 30/31 fender-passenger side - 35.00 [email protected] or 903 343 9378 Last edited by JBD; 05-05-2013 at 06:23 PM.

11-19-2012, 07:12 AM	#2
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	Re: 1931 Model A Victoria Parts Bump

11-23-2012, 05:39 AM	#3
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	Re: 1931 Model A Victoria Parts I also have the rear seat wood, seat base and back support. They are excellent oak and almost perfect. Both for 150.00 plus shipping. Can send pics.

11-23-2012, 04:24 PM	#4
31victoria Junior Member Join Date: Sep 2010 Posts: 4	Re: 1931 Model A Victoria Parts Is this wood only no springs?

11-23-2012, 08:38 PM	#5
Falcon Member Join Date: Nov 2011 Posts: 31	Re: 1931 Model A Victoria Parts Would appreciate some pictures - email to [email protected] Thanks

02-17-2013, 10:24 AM	#6
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	Re: 1931 Model A Victoria Parts Sponsored Links (Register now to hide all advertisements) Been on the road so sorry for the late response. My pics are too large to upload on the Barn. Send me an email and I well send via email. [email protected]

02-17-2013, 06:35 PM	#7
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	Re: 1931 Model A Victoria Parts no springs but do have the male and female latch that hold the back rest up

02-19-2013, 09:45 PM	#8
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	Re: 1931 Model A Victoria Parts i got an email from the address below about the rear seat latch and the email address is not valid. if you are still interested email again. thanks, jim mailto:[email protected]

02-19-2013, 09:59 PM	#9
Tiny Senior Member Join Date: May 2010 Location: Redding Cal Posts: 1,388	Re: 1931 Model A Victoria Parts Do you have any extra plates that the back of the front seats rest on?

02-21-2013, 06:40 AM	#10
aandtman Senior Member Join Date: Sep 2010 Location: Tucson Az Posts: 165	Re: 1931 Model A Victoria Parts I will have one if I don't sell it at San Diego. PM me at [email protected] as a reminder. $25.00 includes shipping in USA.

02-21-2013, 07:35 AM	#11
JBD Senior Member Join Date: May 2010 Location: Arp, Texas Posts: 123	Re: 1931 Model A Victoria Parts I don't have the seat mount plates. All parts sold except passenger front fender. Thanks, Jim