Go Back   The Ford Barn > To The Editors > Questions & Suggestions

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-09-2020, 12:36 PM   #1
aquadave
Junior Member
 
Join Date: Jan 2018
Location: Oakville, ON Canada
Posts: 18
Default Model A stripped threads

I have a 1930 Model A Fordor with "original" engine setup. One of the bolts that fastens the coolant tube to the engine block is stripped. It holds all the way in and when I'm turning what I feel should be the last 1/4 turn the bolt pops loose.


Any suggestions? I'm thinking helicoil but I've never done one so don't know anything about size needed etc..
aquadave is offline   Reply With Quote
Old 04-09-2020, 01:01 PM   #2
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Model A stripped threads

Sponsored Links (Register now to hide all advertisements)
Welcome. Unfortunately you placed your question in a section intended for questions to the editors about the site. Few people read this section and even fewer respond to a question here. Leave it here (too complicated/costly to move it) but place your question here: https://www.fordbarn.com/forum/forumdisplay.php?f=3

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:25 AM.