The Ford Barn

wamnram · 09-11-2019, 10:44 AM

Would anyone have the dimensions of the side plates that support the package tray wood for a 1936 Ford cabriolet?

Any help appreciated!

Terry,OH · 09-12-2019, 05:48 AM

Are these the pieces you reference?

V8ER · 09-12-2019, 07:50 AM

He is referring to the steel L corner brackets.

wamnram · 09-12-2019, 09:15 AM

Thanks V8ER, yes, I am referring to the steel brackets that hold the wood in place. If someone could measure theirs and send me dimensions that would be great!

Terry, I will need the wood eventually, but right now just trying to get all the steel in order. Did you make the wood pieces yourself or find somewhere to buy pre-cut?

Thanks

Terry,OH · 09-13-2019, 08:09 AM

Sponsored Links (Register now to hide all advertisements)

The steel pieces were sold by Lebaron Bonney before they closed so there is a source somewhere.

09-12-2019, 07:50 AM	#3
V8ER Senior Member Join Date: May 2010 Location: near Pittsburgh, PA Posts: 310	Re: 1936 cabriolet package tray support He is referring to the steel L corner brackets.

09-12-2019, 09:15 AM	#4
wamnram Senior Member Join Date: May 2010 Location: San Tan Valley, Arizona Posts: 170	Re: 1936 cabriolet package tray support Thanks V8ER, yes, I am referring to the steel brackets that hold the wood in place. If someone could measure theirs and send me dimensions that would be great! Terry, I will need the wood eventually, but right now just trying to get all the steel in order. Did you make the wood pieces yourself or find somewhere to buy pre-cut? Thanks __________________ Wayne Last edited by wamnram; 09-12-2019 at 09:40 AM.

09-13-2019, 08:09 AM	#5
Terry,OH Senior Member Join Date: May 2010 Posts: 3,590	Re: 1936 cabriolet package tray support Sponsored Links (Register now to hide all advertisements) The steel pieces were sold by Lebaron Bonney before they closed so there is a source somewhere.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode