Info on Schramm aircompressor

[flatheadmurre]

Bringing this Schramm aircompressor back to Sweden.
Would be nice to have some sales litterature and a correct colour code for it.
It´s in pretty rough shape but all the important pieces seems to be there.

[skidmarks]

The ones we had, the engine and everything under the hood was gold. The tin was red.

As far as i know they are still in business building drill rigs. They were outside Philadelphia i think around Conshohocken

Might be under the name PeCo or PennCo something close to that.

The one i would like to have is the crawler dozer / aircompressor with a flathead ford motor

[flatheadmurre]

The tin on this one shows signs of blue...not sure how many coats been put on during the years though.
The place i bought this from still has the big brother in use...try that with a modern one...

[TJ]

Contact the Early Ford V-8 Foundation. They probably have info on the Schramm. www.fordv8foundation.org.

[G.M.]

They are in West Chester,Pa. Contact Richard Schramm he gave me a pile of
service and parts manuals 15 years ago. I took out a few I needed and sent the
rest to Chester County Historical Society in West Chester. A few years later
Richard didn't like the way they were handling inquireries and I think he has
them now. G.M.

[flatheadmurre]

Sponsored Links (Register now to hide all advertisements)

Thanks for the leads i will try to contact them and see what they have in theirs files.

[awelker]

If you PM me your info I can email you a pdf scan of an operator/parts manual. I have two of them. One was in the same enclosure the engine was gold. Tin work did seem to be red. Also have a floor mounted one that has no tin that was green.