The Ford Barn

slowride · 06-05-2022, 03:09 PM

Does anyone know if the pedal shaft is pressed into the bell housing or have any advice on replacing the shaft with the motor still in the car

Brentwood Bob · 06-05-2022, 03:13 PM

Tom Endy · 06-05-2022, 03:54 PM

Synchro909 · 06-05-2022, 10:29 PM

Sponsored Links (Register now to hide all advertisements)

FWIW, pedal shafts and the collar for the end of it are not available for our cars. We have to get creative.

06-05-2022, 03:09 PM	#1
slowride Junior Member Join Date: Aug 2021 Location: East Bethel, MN Posts: 3	pedal shaft on 29 model A Does anyone know if the pedal shaft is pressed into the bell housing or have any advice on replacing the shaft with the motor still in the car

06-05-2022, 03:13 PM	#2
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,240	Re: pedal shaft on 29 model A Yes. This may help. https://m.youtube.com/watch?v=SUQM4_p9kn8

06-05-2022, 03:54 PM	#3
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: pedal shaft on 29 model A See attached article. Tom Endy http://www.santaanitaas.org/wp-conte...v-Dec-2010.pdf

06-05-2022, 10:29 PM	#4
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: pedal shaft on 29 model A Sponsored Links (Register now to hide all advertisements) FWIW, pedal shafts and the collar for the end of it are not available for our cars. We have to get creative. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.