|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
01-25-2016, 08:06 AM
|
#1 |
|
Junior Member
Join Date: Jan 2016
Location: L.I.,N.Y.
Posts: 7
|
Borg Warner R10 in Torque Tube
New here, hello. I have read several old posts in search of installation info on the old Borg Warners in the torque tube trick.
Lots of stuff here on the operation, wiring, etc. But I need to know how to attach the OD main and output shafts to the torque tube shaft. I get how the outer tube is welded to the flange plates and bolted to the OD. Does anyone have info on this? Please help.  
|
|
|
|
01-25-2016, 09:41 AM
|
#2 |
|
Senior Member
Join Date: Jan 2012
Posts: 241
|
Re: Borg Warner R10 in Torque Tube
I also need a output shaft.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
01-25-2016, 08:42 PM
|
#3 |
|
Junior Member
Join Date: Jan 2016
Location: L.I.,N.Y.
Posts: 7
|
Re: Borg Warner R10 in Torque Tube
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 07:27 PM.