The Ford Barn

Newby · 05-07-2021, 08:59 PM

Good evening. First, I have give a big shout out to Randy Gross. He really does do great work. I received my hubs and drums back today. They look great and he is, in my opinion, very reasonable on price for his services. Thanks again Randy!!
My question to all your pros out there is , now that I have my drums done, do I paint just the outside of the drums, or inside and outside? And, what kind of paint. Or, primer and paint. Thank you all in advance.

BRENT in 10-uh-C · 05-08-2021, 04:03 AM

While I don't use Randy's drums, the process should be the same. We wipe down the outside of the drum & hub with wax& grease remover, then mediablast the exterior to crate a slight texture. We then spray a thin coat of catalyzed epoxy, and as soon as that has flashed we come overtop of the epoxy with one coat of gloss 2k urethane paint. Years later, the drums still look fresh and no blistering. Personally, we don't care about the interior, but that could be painted too. We install races after painting and cleanup, and any overspray on the lining surface gets removed during the machining process to true the drum to the hub.

Tom A400 · 01-21-2023, 05:04 PM

Rustoleum high temperature engine paint worked for me

Joe K · 01-21-2023, 08:08 PM

Sponsored Links (Register now to hide all advertisements)

And I would not paint the "friction" surface, but everything else.

Blue "Painter's tape" works - and doesn't leave the trace adhesive like duct or masking tape.

Joe K

05-07-2021, 08:59 PM	#1
Newby Junior Member Join Date: Nov 2020 Location: Streator, Il Posts: 20	Brake drums Good evening. First, I have give a big shout out to Randy Gross. He really does do great work. I received my hubs and drums back today. They look great and he is, in my opinion, very reasonable on price for his services. Thanks again Randy!! My question to all your pros out there is , now that I have my drums done, do I paint just the outside of the drums, or inside and outside? And, what kind of paint. Or, primer and paint. Thank you all in advance.

05-08-2021, 04:03 AM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,516	Re: Brake drums While I don't use Randy's drums, the process should be the same. We wipe down the outside of the drum & hub with wax& grease remover, then mediablast the exterior to crate a slight texture. We then spray a thin coat of catalyzed epoxy, and as soon as that has flashed we come overtop of the epoxy with one coat of gloss 2k urethane paint. Years later, the drums still look fresh and no blistering. Personally, we don't care about the interior, but that could be painted too. We install races after painting and cleanup, and any overspray on the lining surface gets removed during the machining process to true the drum to the hub. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

01-21-2023, 05:04 PM	#3
Tom A400 Junior Member Join Date: Jun 2022 Location: Cary, NC Posts: 19	Re: Brake drums Rustoleum high temperature engine paint worked for me

01-21-2023, 08:08 PM	#4
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,188	Re: Brake drums Sponsored Links (Register now to hide all advertisements) And I would not paint the "friction" surface, but everything else. Blue "Painter's tape" works - and doesn't leave the trace adhesive like duct or masking tape. Joe K __________________ Shudda kept the horse.