|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-05-2015, 04:42 PM | #1 |
Senior Member
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 935
|
Where To Shake-N-Bake My Block?
I have a block that passed pressure and magnetic inspection. Living in Los Angeles Valley would like to have the block baked. Who does it? Thanks: Fred A
Last edited by Fred A; 11-05-2015 at 05:41 PM. |
11-05-2015, 07:06 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Where To Shake-N-Bake My Block?
Fred, give a call down to C&G. They would surely know where to send you.
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
11-05-2015, 08:07 PM | #3 |
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,064
|
Re: Where To Shake-N-Bake My Block?
FredA
Have you talked to Mike Herman with HandH flatheads. They are not too far from you. 818 248 2371 Bruce
__________________
Works good Lasts long time |
11-05-2015, 10:06 PM | #4 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Where To Shake-N-Bake My Block?
What's with H&H? Website is suspended. What's the story?
__________________
Alan |
11-06-2015, 02:34 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 468
|
Re: Where To Shake-N-Bake My Block?
I have my stuff , including blocks and heads stripped at a good old fashioned "hot tank" stripper in Van Neys Ca. This is a real place and does the phosphoric acid stripping. May be the only one left. Jay Leno uses this place also. L & M Stripping 818-983-1200. Great guys, really old place. Always cool car stuff in process. Not expensive.
Just my opinion. |
11-06-2015, 10:39 PM | #6 |
Member
Join Date: Jun 2010
Location: Burbank, Ca.
Posts: 36
|
Re: Where To Shake-N-Bake My Block?
Sponsored Links (Register now to hide all advertisements)
|
11-08-2015, 01:31 AM | #7 |
Senior Member
Join Date: May 2010
Location: Tehachapi, Ca.
Posts: 208
|
Re: Where To Shake-N-Bake My Block?
Valley Head Service
|
11-08-2015, 07:22 AM | #8 |
Senior Member
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 935
|
Re: Where To Shake-N-Bake My Block?
Thanks for the leads. Even though I'm close by, decades of trying to have H&H do a couple of engines, the results have made relations strained. Larry at Valley Head Service is nearby. This could be the one. Valencia also stands to be a good location being out of the evil clutches of municipal LA.
Fred A |
|
|
Sponsored Links (Register now to hide all advertisements) |
|