The Ford Barn

Ricosan · 07-01-2020, 10:09 AM

I want to add pack the universal joint behind the transmission in my 1934 with corn head grease. Will I have to remove the floor boards in order to add the grease?

alchemy · 07-01-2020, 02:44 PM

Sponsored Links (Register now to hide all advertisements)

Should be a zerk on the clamshell. It will mostly fill the cavity between the clamshell and the torquetube bell, but some will eventually make it's way to the front edge of the bell, then between the bell and the inner cone, and then into the joint area. Squirt in lots, it won't hurt anything. It will be a good test of your seal on the clamshell.

07-01-2020, 10:09 AM	#1
Ricosan Senior Member Join Date: May 2018 Location: Tallahassee Posts: 375	1934 U joint lube I want to add pack the universal joint behind the transmission in my 1934 with corn head grease. Will I have to remove the floor boards in order to add the grease? Last edited by Ricosan; 07-01-2020 at 12:46 PM.

07-01-2020, 02:44 PM	#2
alchemy Senior Member Join Date: May 2010 Location: middle of Iowa Posts: 646	Re: 1934 U joint lube Sponsored Links (Register now to hide all advertisements) Should be a zerk on the clamshell. It will mostly fill the cavity between the clamshell and the torquetube bell, but some will eventually make it's way to the front edge of the bell, then between the bell and the inner cone, and then into the joint area. Squirt in lots, it won't hurt anything. It will be a good test of your seal on the clamshell.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode