Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-04-2011, 12:53 PM   #1
35 coupe
Senior Member
 
35 coupe's Avatar
 
Join Date: May 2010
Posts: 373
Default 1935 vinyl roof insert installation

I bought a LB top kit, and was wondering if you put the metal screen back on the wood bows or not. LB instructions do not show it, will it make a difference with-out it, with out the support between the bows. Thanks. HAPPY 4 th of July.
35 coupe is offline   Reply With Quote
Old 07-04-2011, 02:35 PM   #2
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,346
Default Re: 1935 vinyl roof insert installation

"Chicken Wire" wasn't used on all applications. Some used a heavy cotton duck type material like is used on tarps to keep the shape. Some trimmers kept using the wire to keep the shape years after Ford quit using it so you might find it on a later top if it was redone.
rotorwrench is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-04-2011, 02:53 PM   #3
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,856
Default Re: 1935 vinyl roof insert installation

35 Coupe, did I send you instructions on installing a '35/'36 soft top some time ago? You probably already know this but I'll mention anyway, besides providing support and helping hold things in place, the chicken wire also serves as the antenna for a radio.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
Old 07-04-2011, 03:05 PM   #4
keith oh
Senior Member
 
keith oh's Avatar
 
Join Date: May 2010
Location: Millersport, central ohio
Posts: 668
Default Re: 1935 vinyl roof insert installation

Also that "Chicken wire" was used as a hidden radio antenna with a lead wire fastened to it and running down the left corner post. Many people , includeing me, would like to have that very difficult to find fitting on the end of that lead. "page 136 of the 1935-1936 Early Ford V/8 club book"
keith oh is offline   Reply With Quote
Old 07-04-2011, 09:30 PM   #5
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 5,999
Default Re: 1935 vinyl roof insert installation

I checked page 136 of the 35-36 Ford book and the only thing I see on that page is body styles. Are you looking for the plug that fits into the side of the radio that is about 1 1/4" in diameter and has the six holes to connect the speaker, etc? If so I have one.
TJ is offline   Reply With Quote
Old 07-05-2011, 10:26 AM   #6
keith oh
Senior Member
 
keith oh's Avatar
 
Join Date: May 2010
Location: Millersport, central ohio
Posts: 668
Default Re: 1935 vinyl roof insert installation

Sponsored Links (Register now to hide all advertisements)
Sorry, the page is 129. The plug I am speaking of is the one on the end of the antenna wire which comes direct from the chicken wire antenna. Thanks for noteing my mistake on page #.
keith oh is offline   Reply With Quote
Old 12-26-2017, 12:39 PM   #7
jkflathead
Senior Member
 
Join Date: May 2010
Posts: 676
Default Re: 1935 vinyl roof insert installation

I am just wondering if anyone knows how to find that lead that goes into the radio from the chicken wire. I need one as well. I also would like to know how the chicken wire is attached. Is it anchored to the tack trip and to the wood? Thanks. John
jkflathead is offline   Reply With Quote
Old 12-26-2017, 01:20 PM   #8
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,273
Default Re: 1935 vinyl roof insert installation

Don't believe it should touch the tack strip and stapled to the wood
deuce lover is online now   Reply With Quote
Old 12-26-2017, 02:42 PM   #9
Ken Arms
Senior Member
 
Ken Arms's Avatar
 
Join Date: May 2010
Location: Essex Vermont
Posts: 599
Default Re: 1935 vinyl roof insert installation

I'm about to do a top as well, any pics out there of the installation? Ken
Ken Arms is offline   Reply With Quote
Old 12-26-2017, 05:01 PM   #10
TagMan
Senior Member
 
Join Date: Jul 2011
Location: Alvaton, Kentucky, USA
Posts: 952
Default Re: 1935 vinyl roof insert installation

Here's a few pics I took when my buddy & I dissasembled the soft top on my '36 3W coupe. Should be the same as a '35. I haven't gotten to the point of reassembly yet, so no pictures. Sorry, this is NOT a tutorial, but one or two of the pics might be of use to you.
In no particular order:

top bows and headliner1 by TagMan, on Flickr
soft top removal7 by TagMan, on Flickr
soft top removal8 + antenna wire to screen + mouse nest by TagMan, on Flickr
soft top removal6 by TagMan, on Flickr
soft top removal5 by TagMan, on Flickr
soft top removal3 by TagMan, on Flickr
soft top removal4 by TagMan, on Flickr
soft top removal2 by TagMan, on Flickr
TagMan is offline   Reply With Quote
Old 12-26-2017, 07:20 PM   #11
Habusailor
Senior Member
 
Habusailor's Avatar
 
Join Date: Dec 2016
Location: Fargo North Dakota
Posts: 264
Default Re: 1935 vinyl roof insert installation

Chicken wire was originally put in as the radio antenna. My 35 has the original chicken wire. I would recommend putting that or something like it in to keep the fabric off of the wood slats. I used the wire and then some thin poly batting. Has looked good for over 20 years.

Sent from my SM-T550 using Tapatalk
Habusailor is offline   Reply With Quote
Old 12-26-2017, 08:38 PM   #12
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 5,999
Default Re: 1935 vinyl roof insert installation

I use stucco wire on those tops. It's stiffer than chicken wire(won't bend or sag between bows) and is coated, so it doesn't rust. If using it for an antenna, you staple it to the wood, but don't let it touch any metal on the body. I then put canvas over the wire and then some thin batting to slightly pad the top.
TJ is offline   Reply With Quote
Old 12-26-2017, 09:32 PM   #13
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,811
Default Re: 1935 vinyl roof insert installation

I found it worked pretty good when applying the topping to secure it around the perimeter with short sections of retainer strip. They give you something to work against to get the material tight.
Attached Images
File Type: jpg IMAG0678 (Medium).jpg (17.5 KB, 192 views)
rich b is offline   Reply With Quote
Old 12-27-2017, 12:18 AM   #14
Gary Tosel
Senior Member
 
Gary Tosel's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,126
Default Re: 1935 vinyl roof insert installation

My experience with the soft top molding is that they are not all alike. Drake reproduction is different than others and is the one that I have found will fit the best. Other makes, have fun making them fit in the roof groove.

It is my experience for what it is worth.
Gary Tosel is offline   Reply With Quote
Old 05-17-2021, 09:40 AM   #15
HenryCarl
Member
 
Join Date: Oct 2019
Posts: 51
Default Re: 1935 vinyl roof insert installation

Quote:
Originally Posted by JM 35 Sedan View Post
35 Coupe, did I send you instructions on installing a '35/'36 soft top some time ago? You probably already know this but I'll mention anyway, besides providing support and helping hold things in place, the chicken wire also serves as the antenna for a radio.
John, I just found your note. Do you still have instructions to replace the rubber roof insert? I also have a '35...Stand Coupe. Thank you. If you need my email: [email protected]
HenryCarl is offline   Reply With Quote
Old 05-18-2021, 05:47 AM   #16
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,856
Default Re: 1935 vinyl roof insert installation

Quote:
Originally Posted by HenryCarl View Post
John, I just found your note. Do you still have instructions to replace the rubber roof insert? I also have a '35...Stand Coupe. Thank you. If you need my email: [email protected]
HenryCarl, Just happened to stumble onto this post this morning. Unfortunately, those top installation instructions are filed (lost) somewhere on my old computer.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
Old 05-18-2021, 07:34 AM   #17
Don Rogers
Senior Member
 
Don Rogers's Avatar
 
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
Default Re: 1935 vinyl roof insert installation

Some of you might remember Dale Sandman on this blog from years ago. Here is a copy of his installation method from years ago. Also my profile image of the weatherstrip installed.

I will assume that your vehicle already has the wooden top bows in
place. If this is so then follow these instructions.

First you will need to go to the hardware store and purchase a length
of chicken wire that is long enough to cover the top opening of you
car. Trim this chicken wire to where it just fits inside the top's
opening. Once trimmed, then use some sort of non metallic tape and tape
all around the outside edge of the chicken wire so it will not ground
to the car body.

If your car still has its original radio antenna
wires, then soldier those in place to the chicken wire at the left
front side. Staple the chicken wire to the wooden top bows and make
sure it lays flat and smooth on the top opening.

Now you will need some napped cotton padding to lay over the chicken
wire. Trim the padding to where it fits just inside the top opening.
Next lay the black top cover material over the top and make sure you
have enough excess material laying over the edges of the top opening.
It is best to lay the black top material flat in the sun for a while to
remove any wrinkles.

Once the top material is laid on the top opening of the car make sure
it is straight. Now what I do is to take four (4) six inch long top
rubber edging pieces and feed them into each corner of the top corners
of the car Make sure you gently stretch the black material so as to not
have any wrinkles.

It is usually best to do this with two people.
Lastly, starting at the back rear of the center of the top of the top
opening of the car, begin feeding in the rubber trim piece. Make sure
you have enough to go around the whole opening of the the car. Slowly
feed it in with a flat edged screw driver. When you get to the corners
then remove the six inch corner piece and continue feeding in the
edging. Continue this process until you have gone all around the top.
You may want to lube the rubber trim with Vaseline to make it easier to
feed in to to trough.

Once the topping is in and is smooth, then simply trim the excess black
covering that is on the outside edge of the rubber trim piece and cut
it off with a good sharp razor.Hope all this made sense to you and it
helps you out. Take care.

Keep V-8ing,
Dale Sandman"
Attached Images
File Type: jpg top seal 03.jpg (97.7 KB, 78 views)
Don Rogers is offline   Reply With Quote
Old 09-16-2021, 01:36 PM   #18
HenryCarl
Member
 
Join Date: Oct 2019
Posts: 51
Default Re: 1935 vinyl roof insert installation

Don and all, I'm about to dive into the top replacement. Mine came from Cartouche. Great info and hints.
HenryCarl is offline   Reply With Quote
Old 09-16-2021, 02:37 PM   #19
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,856
Default Re: 1935 vinyl roof insert installation

Don, thank you for posting Dale Sandman's instructions on replacing the vinyl top. I know Dale sent this to me many years ago, but I filed it so well in my old computer that I can't find it now. I'll download this and file it in several locations and hopefully not lose it again
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
Old 08-13-2023, 04:21 PM   #20
hotstuff1143
Junior Member
 
Join Date: Jul 2023
Location: Spring City Pa
Posts: 7
Default Re: 1935 vinyl roof insert installation

does anyone have the instructions for replacement of the vinyl roof of the 35 4dr.
hotstuff1143 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:02 AM.